target/linux/ath79/dts/ar7241_ubnt_xm.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "ar7241.dtsi"
   7
   8 / {
   9         compatible = "ubnt,xm", "qca,ar7241";
  10         model = "Ubiquiti Networks XM (rev 1.0) board";
  11
  12 /*      extosc: ref {
  13                 compatible = "fixed-clock";
  14                 #clock-cells = <0>;
  15                 clock-frequency = <40000000>;
  16         };
  17 */
  18         keys {
  19                 compatible = "gpio-keys-polled";
  20                 poll-interval = <20>;
  21                 reset {
  22                         linux,code = <KEY_RESTART>;
  23                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  24                         debounce-interval = <60>;
  25                 };
  26         };
  27
  28         leds {
  29                 compatible = "gpio-leds";
  30                 link1 {
  31                         label = "ubnt:red:link1";
  32                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  33                 };
  34
  35                 link2 {
  36                         label = "ubnt:orange:link2";
  37                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  38                 };
  39
  40                 link3 {
  41                         label = "ubnt:green:link3";
  42                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  43                 };
  44
  45                 link4 {
  46                         label = "ubnt:green:link4";
  47                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  48                 };
  49         };
  50 };
  51
  52 &uart {
  53         status = "okay";
  54 };
  55
  56 /*&pll {
  57         clocks = <&extosc>;
  58 };*/
  59
  60 &spi {
  61         status = "okay";
  62         num-cs = <1>;
  63
  64         flash@0 {
  65                 compatible = "jedec,spi-nor";
  66                 reg = <0>;
  67                 spi-max-frequency = <25000000>;
  68
  69                 partitions {
  70                         compatible = "fixed-partitions";
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73
  74                         partition@0 {
  75                                 label = "u-boot";
  76                                 reg = <0x000000 0x040000>;
  77                                 read-only;
  78                         };
  79
  80                         partition@1 {
  81                                 label = "u-boot-env";
  82                                 reg = <0x040000 0x010000>;
  83                         };
  84
  85                         partition@2 {
  86                                 label = "firmware";
  87                                 reg = <0x050000 0x750000>;
  88                         };
  89
  90                         partition@3 {
  91                                 label = "board_config";
  92                                 reg = <0x7a0000 0x010000>;
  93                                 read-only;
  94                         };
  95
  96                         partition@4 {
  97                                 label = "cfg";
  98                                 reg = <0x7b0000 0x040000>;
  99                                 read-only;
 100                         };
 101
 102                         art: partition@5 {
 103                                 label = "art";
 104                                 reg = <0x7f0000 0x010000>;
 105                                 read-only;
 106                         };
 107                 };
 108         };
 109 };
 110
 111 &pcie {
 112         status = "okay";
 113
 114         wifi@0,0 {
 115                 reg = <0x0000 0 0 0 0>;
 116                 qca,no-eeprom;
 117         };
 118 };
 119
 120 &eth0 {
 121         status = "okay";
 122
 123         mtd-mac-address = <&art 0x0>;
 124 };
 125
 126 &eth1 {
 127         status = "okay";
 128
 129         mtd-mac-address = <&art 0x6>;
 130 };