1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
17 compatible = "fixed-clock";
19 clock-frequency = <40000000>;
23 compatible = "gpio-keys";
28 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
29 debounce-interval = <60>;
34 linux,code = <KEY_RESTART>;
35 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
36 debounce-interval = <60>;
41 compatible = "gpio-leds";
44 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
48 label = "buffalo:red:diag";
49 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
53 label = "buffalo:green:usb";
54 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
55 trigger-sources = <&hub_port>;
56 linux,default-trigger = "usbport";
61 compatible = "gpio-export";
65 gpio-export,name = "buffalo:usb-power";
66 gpio-export,output = <1>;
67 gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
72 compatible = "mtd-concat";
73 devices = <&flash0 &flash1>;
76 compatible = "fixed-partitions";
87 reg = <0x40000 0x10000>;
91 art: partition@50000 {
92 reg = <0x50000 0x10000>;
98 compatible = "denx,uimage";
99 reg = <0x60000 0x1f80000>;
104 reg = <0x1fe0000 0x20000>;
105 label = "user_property";
118 compatible = "jedec,spi-nor";
120 spi-max-frequency = <25000000>;
124 compatible = "jedec,spi-nor";
126 spi-max-frequency = <25000000>;
135 phy0: ethernet-phy@0 {
145 phy-handle = <&phy0>;
161 #address-cells = <1>;
167 #trigger-source-cells = <0>;