target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7242.dtsi"
   8
   9 / {
  10         compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
  11         model = "Buffalo WZR-HP-G450H";
  12
  13         memory@0 {
  14                 device_type = "memory";
  15                 reg = <0x0 0x4000000>;
  16         };
  17
  18         keys {
  19                 compatible = "gpio-keys-polled";
  20                 #address-cells = <1>;
  21                 #size-cells = <0>;
  22
  23                 poll-interval = <20>;
  24                 usb {
  25                         linux,code = <BTN_2>;
  26                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  27                         debounce-interval = <60>;
  28                 };
  29
  30                 reset {
  31                         linux,code = <KEY_RESTART>;
  32                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 movie_engine {
  37                         linux,code = <KEY_RESTART>;
  38                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  39                         debounce-interval = <60>;
  40                 };
  41
  42                 aoss {
  43                         linux,code = <KEY_WPS_BUTTON>;
  44                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  45                         debounce-interval = <60>;
  46                 };
  47
  48                 router_off {
  49                         linux,code = <BTN_5>;
  50                         gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
  51                         debounce-interval = <60>;
  52                 };
  53
  54         };
  55
  56         leds {
  57                 compatible = "gpio-leds";
  58                 security {
  59                         label = "buffalo:orange:security";
  60                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 diag {
  64                         label = "buffalo:red:diag";
  65                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  66                 };
  67         };
  68
  69         gpio-export {
  70                 compatible = "gpio-export";
  71                 #size-cells = <0>;
  72
  73                 gpio_usb_power {
  74                         gpio-export,name = "wzr-hp-g450h:usb-power";
  75                         gpio-export,output = <1>;
  76                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  77                 };
  78         };
  79 };
  80
  81 &mdio0 {
  82         status = "okay";
  83         phy-mask = <0x1>;
  84
  85         phy0: ethernet-phy@0 {
  86                 reg = <0>;
  87                 phy-mode = "rgmii";
  88         };
  89 };
  90
  91 &eth0 {
  92         status = "okay";
  93
  94         phy-mode = "rgmii";
  95         pll-data = <0x62000000 0 0>;
  96
  97         fixed-link {
  98                 speed = <1000>;
  99                 full-duplex;
 100         };
 101 };
 102
 103 &uart {
 104         status = "okay";
 105 };
 106
 107 &usb_phy {
 108         status = "okay";
 109 };
 110
 111 &usb {
 112         status = "okay";
 113 };
 114
 115 &pcie {
 116         status = "okay";
 117
 118         ath9k@0 {
 119                 reg = <0x0000 0 0 0 0>;
 120                 qca,no-eeprom;
 121         };
 122 };