1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "meraki,mr12", "qca,ar7242";
10 model = "Meraki MR12";
13 led-boot = &led_power_orange;
14 led-failsafe = &led_power_orange;
15 led-running = &led_power_green;
16 led-upgrade = &led_power_orange;
20 compatible = "gpio-leds";
23 label = "green:link1";
24 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
28 label = "green:link2";
29 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
33 label = "green:link3";
34 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
38 label = "green:link4";
39 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
44 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
47 led_power_orange: power_orange {
48 label = "orange:power";
49 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
53 led_power_green: power_green {
54 label = "green:power";
55 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
60 compatible = "gpio-keys";
64 linux,code = <KEY_RESTART>;
65 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
74 compatible = "pci168c,002a";
75 reg = <0x0000 0 0 0 0>;
77 nvmem-cells = <&macaddr_config_66>;
78 nvmem-cell-names = "mac-address";
79 mac-address-increment = <1>;
86 phy4: ethernet-phy@4 {
94 nvmem-cells = <&macaddr_config_66>;
95 nvmem-cell-names = "mac-address";
97 pll-data = <0x02000000 0x00000101 0x00001313>;
99 phy-mode = "rgmii-id";
100 phy-handle = <&phy4>;
110 nvmem-cells = <&macaddr_config_66>;
111 nvmem-cell-names = "mac-address";
118 compatible = "jedec,spi-nor";
120 spi-max-frequency = <50000000>;
123 compatible = "fixed-partitions";
124 #address-cells = <1>;
129 reg = <0x000000 0x40000>;
134 label = "u-boot-env";
135 reg = <0x40000 0x40000>;
139 config: partition@80000 {
141 reg = <0x80000 0x20000>;
145 compatible = "fixed-layout";
146 #address-cells = <1>;
149 macaddr_config_66: macaddr@66 {
157 reg = <0xa0000 0xf40000>;
158 compatible = "denx,uimage";
163 reg = <0xfe0000 0x20000>;