1 // SPDX-License-Identifier: GPL-2.0-only
6 compatible = "qca,ar9132";
12 bootargs = "console=ttyS0,115200";
21 compatible = "mips,mips24Kc";
22 clocks = <&pll ATH79_CLK_CPU>;
28 compatible = "fixed-clock";
30 clock-output-names = "ref";
31 clock-frequency = <40000000>;
34 cpuintc: interrupt-controller {
35 compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
38 #interrupt-cells = <1>;
40 qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
41 qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
42 <&ddr_ctrl 0>, <&ddr_ctrl 1>;
46 compatible = "simple-bus";
52 interrupt-parent = <&cpuintc>;
55 compatible = "simple-bus";
61 interrupt-parent = <&miscintc>;
63 ddr_ctrl: memory-controller@18000000 {
64 compatible = "qca,ar9132-ddr-controller",
65 "qca,ar7240-ddr-controller";
66 reg = <0x18000000 0x100>;
68 #qca,ddr-wb-channel-cells = <1>;
72 compatible = "ns8250";
73 reg = <0x18020000 0x20>;
76 clocks = <&pll ATH79_CLK_AHB>;
85 compatible = "qca,ar9132-gpio",
87 reg = <0x18040000 0x28>;
96 #interrupt-cells = <2>;
99 pll: pll-controller@18050000 {
100 compatible = "qca,ar9132-pll",
101 "qca,ar9130-pll", "syscon";
102 reg = <0x18050000 0x20>;
108 clock-output-names = "cpu", "ddr", "ahb";
112 compatible = "qca,ar7130-wdt";
113 reg = <0x18060008 0x8>;
117 clocks = <&pll ATH79_CLK_AHB>;
121 miscintc: interrupt-controller@18060010 {
122 compatible = "qca,ar9132-misc-intc",
123 "qca,ar7100-misc-intc";
124 reg = <0x18060010 0x8>;
126 interrupt-parent = <&cpuintc>;
129 interrupt-controller;
130 #interrupt-cells = <1>;
133 rst: reset-controller@1806001c {
134 compatible = "qca,ar9132-reset",
136 reg = <0x1806001c 0x4>;
143 compatible = "qca,ar7100-ehci", "generic-ehci";
144 reg = <0x1b000100 0x100>;
149 has-transaction-translator;
156 #address-cells = <1>;
161 #trigger-source-cells = <0>;
166 compatible = "qca,ar9132-spi", "qca,ar7100-spi";
167 reg = <0x1f000000 0x10>;
169 clocks = <&pll ATH79_CLK_AHB>;
174 #address-cells = <1>;
178 wmac: wmac@180c0000 {
179 compatible = "qca,ar9130-wmac";
180 reg = <0x180c0000 0x230000>;
189 compatible = "qca,ar7200-usb-phy";
191 reset-names = "usb-phy", "usb-suspend-override";
192 resets = <&rst 4>, <&rst 3>;
201 compatible = "qca,ar9130-eth", "syscon";
202 reg = <0x19000000 0x200
204 pll-data = <0x1a000000 0x13000a44 0x00441099>;
205 pll-reg = <0x4 0x14 20>;