target/linux/ath79/dts/ar9330_glinet_ar150.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9330.dtsi"
   8
   9 / {
  10         model = "GL.iNet GL-AR150";
  11         compatible = "glinet,ar150", "qca,ar9330";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-status = &wlan;
  16         };
  17
  18         memory@0 {
  19                 device_type = "memory";
  20                 reg = <0x0 0x4000000>;
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 wlan: wlan {
  27                         label = "gl-ar150:orange:wlan";
  28                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  29                         default-state = "off";
  30                         linux,default-trigger = "phy0tpt";
  31                 };
  32
  33                 lan {
  34                         label = "gl-ar150:green:lan";
  35                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  36                         default-state = "off";
  37                 };
  38
  39                 wan {
  40                         label = "gl-ar150:green:wan";
  41                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  42                         default-state = "off";
  43                 };
  44         };
  45
  46         keys {
  47                 compatible = "gpio-keys-polled";
  48                 #address-cells = <1>;
  49                 #size-cells = <0>;
  50                 poll-interval = <100>;
  51
  52                 manual {
  53                         label = "manual";
  54                         linux,code = <BTN_7>;
  55                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  56                 };
  57
  58                 auto {
  59                         label = "auto";
  60                         linux,code = <BTN_8>;
  61                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
  62                 };
  63
  64                 reset {
  65                         label = "reset";
  66                         linux,code = <KEY_RESTART>;
  67                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  68                 };
  69         };
  70 };
  71
  72 &uart {
  73         status = "okay";
  74 };
  75
  76 &gpio {
  77         status = "okay";
  78 };
  79
  80 &usb {
  81         dr_mode = "host";
  82         status = "okay";
  83 };
  84
  85 &usb_phy {
  86         status = "okay";
  87         gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
  88 };
  89
  90 &spi {
  91         num-chipselects = <1>;
  92         status = "okay";
  93
  94         spiflash@0 {
  95                 #address-cells = <1>;
  96                 #size-cells = <1>;
  97                 compatible = "jedec,spi-nor";
  98                 spi-max-frequency = <104000000>;
  99                 reg = <0>;
 100
 101                 partitions {
 102                         compatible = "fixed-partitions";
 103                         #address-cells = <1>;
 104                         #size-cells = <1>;
 105
 106                         partition@0 {
 107                                 label = "u-boot";
 108                                 reg = <0x000000 0x040000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@1 {
 113                                 label = "u-boot-env";
 114                                 reg = <0x040000 0x010000>;
 115                         };
 116
 117                         partition@2 {
 118                                 label = "firmware";
 119                                 reg = <0x050000 0xfa0000>;
 120                         };
 121
 122                         art: partition@3 {
 123                                 label = "ART";
 124                                 reg = <0xff0000 0x010000>;
 125                                 read-only;
 126                         };
 127                 };
 128         };
 129 };
 130
 131 &mdio0 {
 132         status = "okay";
 133
 134         phy4: ethernet-phy@4 {
 135                 reg = <4>;
 136                 phy-mode = "mii";
 137         };
 138 };
 139
 140 &eth0 {
 141         status = "okay";
 142
 143         mtd-mac-address = <&art 0x0>;
 144
 145         phy-handle = <&phy4>;
 146 };
 147
 148 &eth1 {
 149         status = "okay";
 150
 151         mtd-mac-address = <&art 0x0>;
 152
 153         fixed-link {
 154                 speed = <1000>;
 155                 full-duplex;
 156         };
 157
 158         gmac-config {
 159                 device = <&gmac>;
 160
 161                 switch-phy-addr-swap = <0>;
 162                 switch-phy-swap = <0>;
 163         };
 164 };
 165
 166 &wmac {
 167         status = "okay";
 168         mtd-cal-data = <&art 0x1000>;
 169         mtd-mac-address = <&art 0x0>;
 170 };