1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
10 label-mac-device = &wmac;
12 led-failsafe = &led_vpn;
13 led-upgrade = &led_vpn;
17 compatible = "gpio-keys";
21 linux,code = <KEY_RESTART>;
22 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
23 debounce-interval = <60>;
29 gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
30 debounce-interval = <60>;
35 compatible = "gpio-leds";
39 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
44 gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
49 gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
50 linux,default-trigger = "phy0tpt";
58 nvmem-cells = <&macaddr_art_0>;
59 nvmem-cell-names = "mac-address";
63 switch-phy-addr-swap = <0>;
64 switch-phy-swap = <0>;
71 compatible = "syscon", "simple-mfd";
78 compatible = "jedec,spi-nor";
80 spi-max-frequency = <50000000>;
84 compatible = "fixed-partitions";
90 reg = <0x000000 0x030000>;
96 reg = <0x030000 0x010000>;
101 reg = <0x040000 0x010000>;
104 compatible = "nvmem-cells";
105 #address-cells = <1>;
108 cal_art_1000: cal@1000 {
109 reg = <0x1000 0x440>;
112 macaddr_art_0: macaddr@0 {
116 macaddr_art_1002: macaddr@1002 {
122 compatible = "denx,uimage";
124 reg = <0x050000 0xfb0000>;
141 nvmem-cells = <&cal_art_1000>, <&macaddr_art_1002>;
142 nvmem-cell-names = "calibration", "mac-address";