1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
11 led-boot = &led_system;
12 led-failsafe = &led_system;
13 led-running = &led_system;
14 led-upgrade = &led_system;
15 label-mac-device = ð0;
19 compatible = "gpio-keys";
23 linux,code = <KEY_RESTART>;
24 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
25 debounce-interval = <60>;
30 compatible = "gpio-leds";
33 label = "blue:system";
34 gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
38 reg_usb_vbus: reg_usb_vbus {
39 compatible = "regulator-fixed";
40 regulator-name = "usb_vbus";
41 regulator-min-microvolt = <5000000>;
42 regulator-max-microvolt = <5000000>;
51 compatible = "jedec,spi-nor";
53 spi-max-frequency = <25000000>;
56 compatible = "fixed-partitions";
67 compatible = "tplink,firmware";
68 reg = <0x20000 0x3d0000>;
72 art: partition@3f0000 {
73 reg = <0x3f0000 0x10000>;
84 mtd-mac-address = <&uboot 0x1fc00>;
89 switch-phy-addr-swap = <0>;
90 switch-phy-swap = <0>;
97 compatible = "syscon", "simple-mfd";
106 vbus-supply = <®_usb_vbus>;
117 mtd-cal-data = <&art 0x1000>;
118 mtd-mac-address = <&uboot 0x1fc00>;