1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "ubnt,aircube-ac", "qca,ar9342";
10 model = "Ubiquiti airCube AC";
13 compatible = "gpio-keys";
17 linux,code = <KEY_RESTART>;
18 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
19 debounce-interval = <60>;
28 compatible = "jedec,spi-nor";
30 spi-max-frequency = <25000000>;
33 compatible = "fixed-partitions";
39 reg = <0x000000 0x040000>;
45 reg = <0x040000 0x010000>;
50 compatible = "denx,uimage";
52 reg = <0x050000 0xf60000>;
57 reg = <0xfb0000 0x040000>;
61 art: partition@ff0000 {
63 reg = <0xff0000 0x010000>;
71 clock-frequency = <40000000>;
86 phy0: ethernet-phy@0 {
90 qca,ar8327-initvals = <
91 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
92 0x7c 0x0000007e /* PORT0_STATUS */
100 /* default for ar934x, except for 1000M and 10M */
101 pll-data = <0x06000000 0x00000101 0x00001313>;
103 mtd-mac-address = <&art 0x0>;
106 phy-handle = <&phy0>;
116 mtd-cal-data = <&art 0x1000>;