1 // SPDX-License-Identifier: GPL-2.0-only
3 #include "ar9342_ubnt_wa.dtsi"
6 compatible = "ubnt,nanostation-ac","ubnt,wa", "qca,ar9342";
7 model = "Ubiquiti Nanostation AC (WA)";
10 led-boot = &led_rssi3;
11 led-failsafe = &led_rssi3;
12 led-upgrade = &led_rssi3;
16 compatible = "gpio-leds";
19 label = "ubnt:blue:rssi0";
20 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
24 label = "ubnt:blue:rssi1";
25 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
29 label = "ubnt:blue:rssi2";
30 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
34 label = "ubnt:blue:rssi3";
35 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
44 phy0: ethernet-phy@0 {
48 qca,ar8327-initvals = <
49 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
50 0x58 0xffb7ffb7 /* LED_CTRL2 */
51 0x5c 0x03ffff00 /* LED_CTRL3 */
52 0x7c 0x0000007e /* PORT0_STATUS */
60 /* default for ar934x, except for 1000M and 10M */
61 pll-data = <0x06000000 0x00000101 0x00001313>;
63 mtd-mac-address = <&art 0x0>;
78 mtd-cal-data = <&art 0x1000>;