1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "comfast,cf-e120a-v3", "qca,ar9344";
10 model = "COMFAST CF-E120A v3";
13 led-boot = &led_rssihigh;
14 led-failsafe = &led_rssihigh;
15 led-upgrade = &led_rssihigh;
16 label-mac-device = ð0;
20 compatible = "gpio-leds";
22 pinctrl-names = "default";
23 pinctrl-0 = <&led_rssimediumhigh_pin>;
27 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
32 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
37 gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
38 linux,default-trigger = "phy0tpt";
42 label = "red:rssilow";
43 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
47 label = "red:rssimediumlow";
48 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
52 label = "green:rssimediumhigh";
53 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
56 led_rssihigh: rssihigh {
57 label = "green:rssihigh";
58 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
63 compatible = "gpio-keys";
67 linux,code = <KEY_RESTART>;
68 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
69 debounce-interval = <60>;
75 led_rssimediumhigh_pin: pinmux_rssimediumhigh_pin {
76 pinctrl-single,bits = <0x10 0x0 0xff>;
84 compatible = "jedec,spi-nor";
86 spi-max-frequency = <25000000>;
89 compatible = "fixed-partitions";
95 reg = <0x000000 0x010000>;
99 art: partition@10000 {
101 reg = <0x010000 0x010000>;
106 compatible = "denx,uimage";
108 reg = <0x020000 0x7d0000>;
113 reg = <0x7f0000 0x010000>;
122 phy-handle = <&swphy0>;
123 mtd-mac-address = <&art 0x0>;
127 switch-phy-swap = <1>;
133 mtd-mac-address = <&art 0x6>;
138 mtd-cal-data = <&art 0x1000>;