1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
10 compatible = "comfast,cf-e120a-v3", "qca,ar9344";
11 model = "COMFAST CF-E120A v3";
15 led-boot = &led_rssihigh;
16 led-failsafe = &led_rssihigh;
17 led-upgrade = &led_rssihigh;
18 label-mac-device = ð0;
22 compatible = "gpio-leds";
24 pinctrl-names = "default";
25 pinctrl-0 = <&led_rssimediumhigh_pin>;
28 label = "cf-e120a-v3:green:wan";
29 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
33 label = "cf-e120a-v3:green:lan";
34 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
38 label = "cf-e120a-v3:green:wlan";
39 gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
40 linux,default-trigger = "phy0tpt";
44 label = "cf-e120a-v3:red:rssilow";
45 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
49 label = "cf-e120a-v3:red:rssimediumlow";
50 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
54 label = "cf-e120a-v3:green:rssimediumhigh";
55 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
58 led_rssihigh: rssihigh {
59 label = "cf-e120a-v3:green:rssihigh";
60 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
65 compatible = "gpio-keys";
69 linux,code = <KEY_RESTART>;
70 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
71 debounce-interval = <60>;
77 led_rssimediumhigh_pin: pinmux_rssimediumhigh_pin {
78 pinctrl-single,bits = <0x10 0x0 0xff>;
88 compatible = "jedec,spi-nor";
90 spi-max-frequency = <25000000>;
93 compatible = "fixed-partitions";
99 reg = <0x000000 0x010000>;
103 art: partition@10000 {
105 reg = <0x010000 0x010000>;
110 compatible = "denx,uimage";
112 reg = <0x020000 0x7d0000>;
117 reg = <0x7f0000 0x010000>;
130 phy-handle = <&swphy0>;
131 mtd-mac-address = <&art 0x0>;
135 switch-phy-swap = <1>;
141 mtd-mac-address = <&art 0x6>;
146 mtd-cal-data = <&art 0x1000>;