1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 model = "Devolo Magic 2 Wifi";
10 compatible = "devolo,magic-2-wifi", "qca,ar9344";
13 led-boot = &led_dlan_red;
14 led-failsafe = &led_dlan_red;
15 led-running = &led_dlan_white;
16 led-upgrade = &led_dlan_red;
20 compatible = "gpio-leds";
24 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
25 linux,default-trigger = "phy1tpt";
28 led_dlan_white: dlan_white {
30 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
33 led_dlan_red: dlan_red {
35 gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
41 compatible = "gpio-keys";
44 label = "Reset button";
45 linux,code = <KEY_RESTART>;
46 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
47 debounce-interval = <60>;
51 label = "WIFI button";
52 linux,code = <KEY_RFKILL>;
53 gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
54 debounce-interval = <60>;
58 label = "DLAN button";
60 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
61 debounce-interval = <60>;
69 line-name = "WLAN power";
70 gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
79 compatible = "jedec,spi-nor";
81 spi-max-frequency = <25000000>;
84 compatible = "fixed-partitions";
96 reg = <0x40000 0x10000>;
102 reg = <0x50000 0x10000>;
108 reg = <0x60000 0x10000>;
113 compatible = "denx,uimage";
115 reg = <0x70000 0xf80000>;
118 art: partition@ff0000 {
120 reg = <0xff0000 0x10000>;
128 clock-frequency = <40000000>;
134 pll-data = <0x02000000 0x00000101 0x00001616>;
136 mtd-mac-address = <&art 0x1002>;
137 mtd-mac-address-increment = <2>;
140 phy-handle = <&phy0>;
146 mtd-cal-data = <&art 0x1000>;
153 compatible = "qcom,ath10k";
161 phy0: ethernet-phy@0 {
165 qca,ar8327-initvals = <
166 /* PORT0: RGMII, MAC0/6 exchage, tx_delay 01, No rx_delay */
168 0x08 0x00000000 /* PORT5 PAD MODE CTRL */
169 0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
170 0x7c 0x0000007e /* PORT0_STATUS */