1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/mtd/partitions/uimage.h>
11 label-mac-device = ð0;
12 led-boot = &led_power;
13 led-failsafe = &led_power;
14 led-running = &led_power;
15 led-upgrade = &led_power;
19 compatible = "gpio-keys";
23 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
24 debounce-interval = <60>;
25 linux,code = <KEY_RESTART>;
30 compatible = "gpio-leds";
33 label = "blue:wifi2g";
34 gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
35 linux,default-trigger = "phy1tpt";
40 compatible = "mtd-concat";
42 devices = <&fwconcat0 &fwconcat1>;
45 compatible = "fixed-partitions";
50 compatible = "openwrt,uimage", "denx,uimage";
51 openwrt,ih-magic = <IH_MAGIC_OKLI>;
60 clock-frequency = <40000000>;
67 compatible = "jedec,spi-nor";
69 spi-max-frequency = <40000000>;
72 compatible = "fixed-partitions";
78 reg = <0x000000 0x040000>;
84 reg = <0x040000 0x010000>;
89 reg = <0x050000 0x050000>;
95 reg = <0x0a0000 0x010000>;
99 fwconcat1: partition@b0000 {
101 reg = <0x0b0000 0x170000>;
106 reg = <0x220000 0x010000>;
110 fwconcat0: partition@230000 {
112 reg = <0x230000 0xbc0000>;
117 reg = <0xdf0000 0x200000>;
121 art: partition@ff0000 {
123 reg = <0xff0000 0x010000>;
133 phy0: ethernet-phy@0 {
143 phy-handle = <&phy0>;
144 phy-mode = "rgmii-id";
146 pll-data = <0x02000000 0x00000101 0x00001313>;
160 compatible = "pci168c,0030";
174 mtd-cal-data = <&art 0x1000>;