target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         compatible = "enterasys,ws-ap3705i", "qca,ar9344";
  11         model = "Enterasys WS-AP3705i";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_power_green;
  19                 led-failsafe = &led_power_red;
  20                 led-running = &led_power_green;
  21                 led-upgrade = &led_power_red;
  22                 label-mac-device = &eth0;
  23         };
  24
  25         mtd-concat {
  26                 compatible = "mtd-concat";
  27                 devices = <&concat0 &concat1>;
  28
  29                 partitions {
  30                         compatible = "fixed-partitions";
  31                         #address-cells = <1>;
  32                         #size-cells = <1>;
  33
  34                         partition@0 {
  35                                 compatible = "denx,uimage";
  36                                 label = "firmware";
  37                                 reg = <0x0 0x1dd0000>;
  38                         };
  39                 };
  40         };
  41
  42         leds {
  43                 compatible = "gpio-leds";
  44
  45                 pinctrl-names = "default";
  46                 pinctrl-0 = <&enable_gpio_11 &enable_gpio_16>;
  47
  48                 led_power_green: power_green {
  49                         label = "ws-ap3705i:green:power";
  50                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 led_power_red: power_red {
  54                         label = "ws-ap3705i:red:power";
  55                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 lan_blue {
  59                         label = "ws-ap3705i:blue:lan";
  60                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
  61                 };
  62
  63                 lan_green {
  64                         label = "ws-ap3705i:green:lan";
  65                         gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  66                 };
  67
  68                 radio2 {
  69                         label = "ws-ap3705i:green:radio2";
  70                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  71                         linux,default-trigger = "phy0tpt";
  72                 };
  73         };
  74
  75         ath9k-leds {
  76                 compatible = "gpio-leds";
  77
  78                 radio1 {
  79                         label = "ws-ap3705i:green:radio1";
  80                         gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
  81                         linux,default-trigger = "phy1tpt";
  82                 };
  83         };
  84
  85         keys {
  86                 compatible = "gpio-keys";
  87
  88                 reset {
  89                         label = "Reset button";
  90                         linux,code = <KEY_RESTART>;
  91                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  92                 };
  93         };
  94 };
  95
  96 &ref {
  97         clock-frequency = <40000000>;
  98 };
  99
 100 &uart {
 101         status = "okay";
 102 };
 103
 104 &pinmux {
 105         enable_gpio_16: pinmux_enable_gpio_16 {
 106                 pinctrl-single,bits = <0x10 0x0 0x000000ff>;
 107         };
 108
 109         enable_gpio_11: pinmux_enable_gpio_11 {
 110                 pinctrl-single,bits = <0x8 0x0 0xff000000>;
 111         };
 112 };
 113
 114 &wmac {
 115         status = "okay";
 116         qca,no-eeprom;
 117 };
 118
 119 &spi {
 120         status = "okay";
 121
 122         cs-gpios = <0>, <0>;
 123         num-cs = <2>;
 124
 125         flash@0 {
 126                 compatible = "jedec,spi-nor";
 127                 reg = <0>;
 128                 spi-max-frequency = <25000000>;
 129
 130                 partitions {
 131                         compatible = "fixed-partitions";
 132                         #address-cells = <1>;
 133                         #size-cells = <1>;
 134
 135                         partition@0 {
 136                                 label = "u-boot-bak";
 137                                 reg = <0x0 0x80000>;
 138                                 read-only;
 139                         };
 140
 141                         partition@80000 {
 142                                 label = "u-boot-env0";
 143                                 reg = <0x80000 0x10000>;
 144                                 read-only;
 145                         };
 146
 147                         partition@90000 {
 148                                 label = "u-boot-env1";
 149                                 reg = <0x90000 0x10000>;
 150                                 read-only;
 151                         };
 152
 153                         partition@a0000 {
 154                                 label = "u-boot";
 155                                 reg = <0xa0000 0x80000>;
 156                                 read-only;
 157                         };
 158
 159                         partition@120000 {
 160                                 label = "calibrate";
 161                                 reg = <0x120000 0x10000>;
 162                                 read-only;
 163                         };
 164
 165                         partition@130000 {
 166                                 label = "nvram";
 167                                 reg = <0x130000 0x100000>;
 168                                 read-only;
 169                         };
 170
 171                         concat0: partition@230000 {
 172                                 label = "concat0";
 173                                 reg = <0x230000 0xdd0000>;
 174                         };
 175                 };
 176         };
 177
 178         flash@1 {
 179                 compatible = "jedec,spi-nor";
 180                 reg = <1>;
 181                 spi-max-frequency = <25000000>;
 182
 183                 partitions {
 184                         compatible = "fixed-partitions";
 185                         #address-cells = <1>;
 186                         #size-cells = <1>;
 187
 188                         concat1: partition@0 {
 189                                 label = "concat1";
 190                                 reg = <0x0 0x1000000>;
 191                         };
 192                 };
 193         };
 194 };
 195
 196 &pcie {
 197         status = "okay";
 198
 199         ath9k: wifi@0,0 {
 200                 compatible = "pci168c,0033";
 201                 reg = <0x0000 0 0 0 0>;
 202                 qca,no-eeprom;
 203                 #gpio-cells = <2>;
 204                 gpio-controller;
 205         };
 206 };
 207
 208 &mdio0 {
 209         status = "okay";
 210
 211         phy0: ethernet-phy@0 {
 212                 reg = <0>;
 213         };
 214 };
 215
 216 &eth0 {
 217         status = "okay";
 218
 219         pll-data = <0x1e000000 0x08000101 0x08001313>;
 220
 221         phy-mode = "rgmii";
 222         phy-handle = <&phy0>;
 223
 224         gmac-config {
 225                 device = <&gmac>;
 226                 rgmii-gmac0 = <1>;
 227                 rxd-delay = <0>;
 228                 rxdv-delay = <0>;
 229                 txen-delay = <0>;
 230                 txd-delay = <0>;
 231         };
 232 };