1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 model = "OCEDO Raccoon";
10 compatible = "ocedo,raccoon", "qca,ar9344";
13 bootargs = "console=ttyS0,115200n8";
17 led-boot = &led_system;
18 led-failsafe = &led_system;
19 led-running = &led_system;
20 led-upgrade = &led_system;
24 compatible = "gpio-leds";
27 label = "raccoon:green:power";
28 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
33 label = "raccoon:yellow:wlan24";
34 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
35 linux,default-trigger = "phy0tpt";
39 label = "raccoon:blue:sys";
40 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
45 compatible = "gpio-leds";
48 label = "raccoon:red:wlan5";
49 gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
50 linux,default-trigger = "phy1tpt";
55 compatible = "gpio-keys";
58 linux,code = <KEY_RESTART>;
59 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
60 debounce-interval = <60>;
66 clock-frequency = <40000000>;
79 compatible = "jedec,spi-nor";
81 spi-max-frequency = <25000000>;
84 compatible = "fixed-partitions";
90 reg = <0x000000 0x040000>;
96 reg = <0x040000 0x010000>;
100 compatible = "denx,uimage";
102 reg = <0x050000 0x740000>;
107 reg = <0x790000 0x740000>;
113 reg = <0xed0000 0x110000>;
119 reg = <0xfe0000 0x010000>;
123 art: partition@ff0000 {
125 reg = <0xff0000 0x010000>;
136 compatible = "pci168c,0030";
137 reg = <0x0000 0 0 0 0>;
138 mtd-mac-address = <&art 0xc>;
148 mtd-cal-data = <&art 0x1000>;
149 mtd-mac-address = <&art 0x6>;
157 phy0: ethernet-phy@0 {
165 pll-data = <0x06000000 0x00000101 0x00001313>;
167 mtd-mac-address = <&art 0x0>;
169 phy-mode = "rgmii-id";
170 phy-handle = <&phy0>;