1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
10 model = "OCEDO Raccoon";
11 compatible = "ocedo,raccoon", "qca,ar9344";
18 compatible = "gpio-leds";
21 label = "raccoon:green:power";
22 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
27 label = "raccoon:yellow:wlan24";
28 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
29 default-state = "off";
30 linux,default-trigger = "phy0tpt";
34 label = "raccoon:blue:sys";
35 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
40 compatible = "gpio-leds";
43 label = "raccoon:red:wlan5";
44 gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
45 default-state = "off";
46 linux,default-trigger = "phy1tpt";
51 compatible = "gpio-keys-polled";
57 linux,code = <KEY_RESTART>;
58 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
59 debounce-interval = <60>;
65 clock-frequency = <40000000>;
84 compatible = "jedec,spi-nor";
86 spi-max-frequency = <25000000>;
89 compatible = "fixed-partitions";
95 reg = <0x000000 0x040000>;
100 label = "u-boot-env";
101 reg = <0x040000 0x010000>;
106 reg = <0x050000 0x740000>;
111 reg = <0x790000 0x740000>;
117 reg = <0xed0000 0x110000>;
123 reg = <0xfe0000 0x010000>;
127 art: partition@ff0000 {
129 reg = <0xff0000 0x010000>;
139 ath9k: wifi@168c,0030 {
140 compatible = "pci168c,0030";
141 reg = <0x0000 0 0 0 0>;
142 mtd-mac-address = <&art 0xc>;
152 mtd-cal-data = <&art 0x1000>;
153 mtd-mac-address = <&art 0x6>;
161 phy0: ethernet-phy@0 {
170 /* default for ar934x, except for 1000M */
171 pll-data = <0x06000000 0x00000101 0x00001616>;
173 mtd-mac-address = <&art 0x0>;
176 phy-handle = <&phy0>;