1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 model = "OCEDO Raccoon";
10 compatible = "ocedo,raccoon", "qca,ar9344";
13 bootargs = "console=ttyS0,115200n8";
17 led-boot = &led_system;
18 led-failsafe = &led_system;
19 led-running = &led_system;
20 led-upgrade = &led_system;
24 compatible = "gpio-leds";
27 label = "green:power";
28 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
33 label = "yellow:wlan24";
34 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
35 linux,default-trigger = "phy0tpt";
40 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
45 compatible = "gpio-leds";
49 gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
50 linux,default-trigger = "phy1tpt";
55 compatible = "gpio-keys";
58 linux,code = <KEY_RESTART>;
59 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
60 debounce-interval = <60>;
66 clock-frequency = <40000000>;
73 compatible = "jedec,spi-nor";
75 spi-max-frequency = <50000000>;
78 compatible = "fixed-partitions";
84 reg = <0x000000 0x040000>;
90 reg = <0x040000 0x010000>;
94 compatible = "denx,uimage";
96 reg = <0x050000 0x740000>;
101 reg = <0x790000 0x740000>;
107 reg = <0xed0000 0x110000>;
113 reg = <0xfe0000 0x010000>;
117 art: partition@ff0000 {
119 reg = <0xff0000 0x010000>;
130 compatible = "pci168c,0030";
131 reg = <0x0000 0 0 0 0>;
132 nvmem-cells = <&macaddr_art_c>;
133 nvmem-cell-names = "mac-address";
143 mtd-cal-data = <&art 0x1000>;
144 nvmem-cells = <&macaddr_art_6>;
145 nvmem-cell-names = "mac-address";
153 phy0: ethernet-phy@0 {
161 pll-data = <0x06000000 0x00000101 0x00001313>;
163 nvmem-cells = <&macaddr_art_0>;
164 nvmem-cell-names = "mac-address";
166 phy-mode = "rgmii-id";
167 phy-handle = <&phy0>;
171 compatible = "nvmem-cells";
172 #address-cells = <1>;
175 macaddr_art_0: macaddr@0 {
179 macaddr_art_6: macaddr@6 {
183 macaddr_art_c: macaddr@c {