target/linux/ath79/dts/ar9344_wd_mynet-n750.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "ar9344_wd_mynet-nxxx.dtsi"
   4
   5 / {
   6         model = "Western Digital My Net N750";
   7         compatible = "wd,mynet-n750", "qca,ar9344";
   8
   9         aliases {
  10                 led-boot = &led_power;
  11                 led-failsafe = &led_power;
  12                 led-running = &led_power;
  13                 led-upgrade = &led_power;
  14         };
  15
  16         leds {
  17                 compatible = "gpio-leds";
  18
  19                 wifi {
  20                         label = "blue:wireless";
  21                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  22                 };
  23
  24                 internet {
  25                         label = "blue:internet";
  26                         gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
  27                 };
  28
  29                 wps {
  30                         label = "blue:wps";
  31                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  32                 };
  33
  34                 led_power: power {
  35                         label = "blue:power";
  36                         gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys";
  42
  43                 reset {
  44                         linux,code = <KEY_RESTART>;
  45                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 wps {
  49                         linux,code = <KEY_WPS_BUTTON>;
  50                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  51                 };
  52         };
  53 };
  54
  55 &gpio {
  56         gpio_ext_lna0 {
  57                 gpio-hog;
  58                 gpios = <15 0>;
  59                 output-high;
  60                 line-name = "ext:lna0";
  61         };
  62
  63         gpio_ext_lna1 {
  64                 gpio-hog;
  65                 gpios = <18 0>;
  66                 output-high;
  67                 line-name = "ext:lna1";
  68         };
  69 };
  70
  71 &usb {
  72         #address-cells = <1>;
  73         #size-cells = <0>;
  74         status = "okay";
  75
  76         port@1 {
  77                 #address-cells = <1>;
  78                 #size-cells = <0>;
  79                 reg = <1>;
  80                 #trigger-source-cells = <0>;
  81
  82                 hub_port1: port@1 {
  83                         reg = <1>;
  84                         #trigger-source-cells = <0>;
  85                 };
  86
  87                 hub_port2: port@2 {
  88                         reg = <2>;
  89                         #trigger-source-cells = <0>;
  90                 };
  91         };
  92 };
  93
  94 &mdio0 {
  95         status = "okay";
  96
  97         phy-mask = <0>;
  98
  99         switch0@1f {
 100                 compatible = "qca,ar8327";
 101                 reg = <0x1f>;
 102
 103                 qca,ar8327-initvals = <
 104                         0x04 0x07600000 /* PORT0 PAD MODE CTRL */
 105                         0x10 0x80000080 /* POWER_ON_STRAP */
 106                         0x50 0xc737c737 /* LED_CTRL0 */
 107                         0x54 0x00000000 /* LED_CTRL1 */
 108                         0x58 0x00000000 /* LED_CTRL2 */
 109                         0x5c 0x0030c300 /* LED_CTRL3 */
 110                         0x7c 0x0000007e /* PORT0_STATUS */
 111                         >;
 112         };
 113 };
 114
 115 &eth0 {
 116         status = "okay";
 117
 118         /* default for ar934x, except for 1000M */
 119         pll-data = <0x06000000 0x00000101 0x00001616>;
 120
 121         phy-mode = "rgmii";
 122         fixed-link {
 123                 speed = <1000>;
 124                 full-duplex;
 125         };
 126 };