1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 model = "Winchannel WB2000";
10 compatible = "winchannel,wb2000", "qca,ar9344";
13 bootargs = "console=ttyS0,115200n8";
17 led-boot = &led_system;
18 led-failsafe = &led_system;
19 led-running = &led_system;
20 led-upgrade = &led_system;
24 compatible = "i2c-gpio";
25 gpios = <&gpio 17 GPIO_ACTIVE_HIGH
26 &gpio 16 GPIO_ACTIVE_HIGH
32 compatible = "dallas,ds1339";
38 compatible = "gpio-leds";
42 gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
43 linux,default-trigger = "phy0tpt";
48 gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
49 trigger-sources = <&hub_port1>, <&hub_port2>;
50 linux,default-trigger = "usbport";
54 label = "green:system";
55 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
61 compatible = "gpio-keys";
64 linux,code = <KEY_RESTART>;
65 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
66 debounce-interval = <60>;
71 compatible = "gpio-leds";
75 gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
76 linux,default-trigger = "phy1tpt";
82 clock-frequency = <40000000>;
89 compatible = "jedec,spi-nor";
91 spi-max-frequency = <25000000>;
94 compatible = "fixed-partitions";
105 label = "u-boot-env";
106 reg = <0x40000 0x10000>;
112 reg = <0x50000 0xf80000>;
113 compatible = "denx,uimage";
118 reg = <0xfd0000 0x10000>;
122 art: partition@fe0000 {
124 reg = <0xfe0000 0x10000>;
128 addr: partition@ff0000 {
130 reg = <0xff0000 0x10000>;
141 compatible = "pci168c,0030";
142 reg = <0x0000 0 0 0 0>;
144 mtd-mac-address = <&addr 0x0>;
145 mtd-mac-address-increment = <0x10>;
152 #address-cells = <1>;
157 #address-cells = <1>;
160 #trigger-source-cells = <0>;
164 #trigger-source-cells = <0>;
169 #trigger-source-cells = <0>;
181 mtd-cal-data = <&art 0x1000>;
182 mtd-mac-address = <&addr 0x0>;
190 phy4: ethernet-phy@4 {
198 pll-data = <0xe000000 0x04000101 0x04001313>;
200 mtd-mac-address = <&addr 0x0>;
201 mtd-mac-address-increment = <0x21>;
203 phy-mode = "rgmii-rxid";
204 phy-handle = <&phy4>;