1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca953x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "comfast,cf-e5", "qca,qca9531";
10 model = "COMFAST CF-E5/E7";
13 label-mac-device = ð0;
17 compatible = "gpio-keys";
21 linux,code = <KEY_RESTART>;
22 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
27 compatible = "gpio-leds";
28 pinctrl-names = "default";
29 pinctrl-0 = <&jtag_disable_pins &led_wan_pin>;
33 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
38 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
43 gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
44 linux,default-trigger = "phy0tpt";
49 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
54 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
59 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
71 #trigger-source-cells = <0>;
83 compatible = "jedec,spi-nor";
85 spi-max-frequency = <25000000>;
88 compatible = "fixed-partitions";
94 reg = <0x000000 0x010000>;
98 art: partition@10000 {
100 reg = <0x010000 0x010000>;
105 compatible = "denx,uimage";
107 reg = <0x020000 0xfd0000>;
111 label = "art-backup";
112 reg = <0xff0000 0x010000>;
122 phy-handle = <&swphy4>;
124 mtd-mac-address = <&art 0x0>;
128 mtd-mac-address = <&art 0x6>;
134 mtd-cal-data = <&art 0x1000>;
138 led_wan_pin: pinmux_led_wan_pin {
139 pinctrl-single,bits = <0x4 0x0 0xff>;