target/linux/ath79/dts/qca9531_glinet_gl-ar750.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "glinet,gl-ar750", "qca,qca9531";
  10         model = "GL.iNet GL-AR750";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17                 label-mac-device = &eth0;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 pinctrl-names = "default";
  24                 pinctrl-0 = <&jtag_disable_pins>;
  25
  26                 reset {
  27                         label = "reset";
  28                         linux,code = <KEY_RESTART>;
  29                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 mode {
  33                         label = "mode";
  34                         linux,code = <BTN_0>;
  35                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  36                 };
  37         };
  38
  39         leds {
  40                 compatible = "gpio-leds";
  41
  42                 led_power: power {
  43                         label = "white:power";
  44                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  45                         default-state = "on";
  46                 };
  47
  48                 wlan2g {
  49                         label = "white:wlan2g";
  50                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  51                         linux,default-trigger = "phy1tpt";
  52                 };
  53
  54                 wlan5g {
  55                         label = "white:wlan5g";
  56                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  57                         linux,default-trigger = "phy0tpt";
  58                 };
  59         };
  60
  61         i2c {
  62                 compatible = "i2c-gpio";
  63
  64                 sda-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  65                 scl-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  66         };
  67 };
  68
  69 &pcie0 {
  70         status = "okay";
  71
  72         wifi@0,0 {
  73                 compatible = "qcom,ath10k";
  74                 reg = <0 0 0 0 0>;
  75         };
  76 };
  77
  78 &usb0 {
  79         status = "okay";
  80 };
  81
  82 &usb_phy {
  83         status = "okay";
  84 };
  85
  86 &spi {
  87         status = "okay";
  88
  89         flash@0 {
  90                 compatible = "jedec,spi-nor";
  91                 reg = <0>;
  92                 spi-max-frequency = <25000000>;
  93
  94                 partitions {
  95                         compatible = "fixed-partitions";
  96                         #address-cells = <1>;
  97                         #size-cells = <1>;
  98
  99                         partition@0 {
 100                                 label = "u-boot";
 101                                 reg = <0x000000 0x040000>;
 102                                 read-only;
 103                         };
 104
 105                         partition@40000 {
 106                                 label = "u-boot-env";
 107                                 reg = <0x040000 0x010000>;
 108                                 read-only;
 109                         };
 110
 111                         art: partition@50000 {
 112                                 label = "art";
 113                                 reg = <0x050000 0x010000>;
 114                                 read-only;
 115
 116                                 nvmem-layout {
 117                                         compatible = "fixed-layout";
 118                                         #address-cells = <1>;
 119                                         #size-cells = <1>;
 120
 121                                         macaddr_art_0: macaddr@0 {
 122                                                 compatible = "mac-base";
 123                                                 reg = <0x0 0x6>;
 124                                                 #nvmem-cell-cells = <1>;
 125                                         };
 126                                 };
 127                         };
 128
 129                         partition@60000 {
 130                                 compatible = "denx,uimage";
 131                                 label = "firmware";
 132                                 reg = <0x060000 0xfa0000>;
 133                         };
 134                 };
 135         };
 136 };
 137
 138 &eth0 {
 139         status = "okay";
 140
 141         phy-handle = <&swphy4>;
 142
 143         nvmem-cells = <&macaddr_art_0 0>;
 144         nvmem-cell-names = "mac-address";
 145 };
 146
 147 &eth1 {
 148         nvmem-cells = <&macaddr_art_0 1>;
 149         nvmem-cell-names = "mac-address";
 150 };
 151
 152 &wmac {
 153         status = "okay";
 154
 155         mtd-cal-data = <&art 0x1000>;
 156 };