target/linux/ath79/dts/qca9531_tplink_tl-wr902ac-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr902ac-v1", "qca,qca9531";
  11         model = "TP-Link TL-WR902AC v1";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18                 label-mac-device = &wmac;
  19         };
  20
  21         chosen {
  22                 bootargs = "console=ttyS0,115200n8";
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 led_power: power {
  29                         label = "tp-link:green:power";
  30                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  31                         default-state = "on";
  32                 };
  33
  34                 internet {
  35                         label = "tp-link:green:internet";
  36                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 wlan2g {
  40                         label = "tp-link:green:wlan2g";
  41                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  42                         linux,default-trigger = "phy0tpt";
  43                 };
  44
  45                 usb {
  46                         label = "tp-link:green:usb";
  47                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  48                         trigger-sources = <&hub_port0>;
  49                         linux,default-trigger = "usbport";
  50                 };
  51
  52                 wps {
  53                         label = "tp-link:green:wps";
  54                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 lan {
  58                         label = "tp-link:green:lan";
  59                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  60                 };
  61         };
  62
  63         keys {
  64                 compatible = "gpio-keys";
  65
  66                 reset {
  67                         label = "Reset button";
  68                         linux,code = <KEY_RESTART>;
  69                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  70                 };
  71
  72                 wps {
  73                         label = "WPS button";
  74                         linux,code = <KEY_WPS_BUTTON>;
  75                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  76                 };
  77
  78                 sw1 {
  79                         label = "Mode switch 1";
  80                         linux,input-type = <EV_SW>;
  81                         linux,code = <BTN_0>;
  82                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  83                 };
  84
  85                 sw2 {
  86                         label = "Mode switch 2";
  87                         linux,input-type = <EV_SW>;
  88                         linux,code = <BTN_1>;
  89                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  90                 };
  91         };
  92
  93         gpio-export {
  94                 compatible = "gpio-export";
  95
  96                 gpio_usb_power {
  97                         gpio-export,name = "tp-link:power:usb";
  98                         gpio-export,output = <1>;
  99                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
 100                 };
 101         };
 102 };
 103
 104 &uart {
 105         status = "okay";
 106 };
 107
 108 &spi {
 109         status = "okay";
 110
 111         flash@0 {
 112                 compatible = "jedec,spi-nor";
 113                 reg = <0>;
 114                 spi-max-frequency = <25000000>;
 115
 116                 partitions {
 117                         compatible = "fixed-partitions";
 118                         #address-cells = <1>;
 119                         #size-cells = <1>;
 120
 121                         partition@0 {
 122                                 label = "u-boot";
 123                                 reg = <0x000000 0x020000>;
 124                                 read-only;
 125                         };
 126
 127                         partition@20000 {
 128                                 compatible = "tplink,firmware";
 129                                 label = "firmware";
 130                                 reg = <0x020000 0x730000>;
 131                         };
 132
 133                         tplink: partition@750000 {
 134                                 label = "tplink";
 135                                 reg = <0x750000 0x0a0000>;
 136                                 read-only;
 137                         };
 138
 139                         art: partition@7f0000 {
 140                                 label = "art";
 141                                 reg = <0x7f0000 0x010000>;
 142                                 read-only;
 143                         };
 144                 };
 145         };
 146 };
 147
 148 &eth0 {
 149         status = "okay";
 150
 151         phy-handle = <&swphy4>;
 152
 153         mtd-mac-address = <&tplink 0x8>;
 154         mtd-mac-address-increment = <1>;
 155 };
 156
 157 &eth1 {
 158         compatible = "syscon", "simple-mfd";
 159 };
 160
 161 &wmac {
 162         status = "okay";
 163
 164         mtd-cal-data = <&art 0x1000>;
 165         mtd-mac-address = <&tplink 0x8>;
 166 };
 167
 168 &pcie0 {
 169         status = "okay";
 170
 171         wifi@0,0 {
 172                 compatible = "pci168c,0050";
 173                 reg = <0x0000 0 0 0 0>;
 174         };
 175 };
 176
 177 &usb_phy {
 178         status = "okay";
 179 };
 180
 181 &usb0 {
 182         #address-cells = <1>;
 183         #size-cells = <0>;
 184         status = "okay";
 185
 186         hub_port0: port@1 {
 187                 reg = <1>;
 188                 #trigger-source-cells = <0>;
 189         };
 190 };