target/linux/ath79/dts/qca9533_dlink_dap-13xx.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_power;
  11                 led-failsafe = &led_status;
  12                 led-running = &led_power;
  13                 led-upgrade = &led_status;
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys";
  18
  19                 wps {
  20                         label = "wps";
  21                         linux,code = <KEY_WPS_BUTTON>;
  22                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 reset {
  26                         label = "reset";
  27                         linux,code = <KEY_RESTART>;
  28                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  29                 };
  30         };
  31
  32         leds {
  33                 compatible = "gpio-leds";
  34
  35                 led_power: power {
  36                         label = "green:power";
  37                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 led_status: status {
  41                         label = "red:status";
  42                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 rssilow {
  46                         label = "red:rssilow";
  47                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 rssimediumlow {
  51                         label = "green:rssimediumlow";
  52                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 rssimediumhigh {
  56                         label = "green:rssimediumhigh";
  57                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 rssihigh {
  61                         label = "green:rssihigh";
  62                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  63                 };
  64         };
  65 };
  66
  67 &spi {
  68         status = "okay";
  69
  70         num-cs = <1>;
  71
  72         flash@0 {
  73                 compatible = "jedec,spi-nor";
  74                 reg = <0>;
  75                 spi-max-frequency = <50000000>;
  76
  77                 partitions {
  78                         compatible = "fixed-partitions";
  79                         #address-cells = <1>;
  80                         #size-cells = <1>;
  81
  82                         partition@0 {
  83                                 label = "u-boot";
  84                                 reg = <0x0 0x10000>;
  85                                 read-only;
  86                         };
  87
  88                         art: partition@10000 {
  89                                 label = "art";
  90                                 reg = <0x10000 0x10000>;
  91                                 read-only;
  92                         };
  93
  94                         partition@20000 {
  95                                 label = "mp";
  96                                 reg = <0x20000 0x10000>;
  97                                 read-only;
  98                         };
  99
 100                         partition@30000 {
 101                                 label = "config";
 102                                 reg = <0x30000 0x10000>;
 103                                 read-only;
 104                         };
 105
 106                         partition@40000 {
 107                                 label = "firmware";
 108                                 reg = <0x40000 0x7c0000>;
 109                                 compatible = "denx,uimage";
 110                         };
 111                 };
 112         };
 113 };
 114
 115 &uart {
 116         status = "okay";
 117 };
 118
 119 &eth0 {
 120         status = "okay";
 121 };
 122
 123 &wmac {
 124         status = "okay";
 125
 126         mtd-cal-data = <&art 0x1000>;
 127 };