target/linux/ath79/dts/qca9533_glinet_ar300m.dtsi

   1 /dts-v1/;
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca9533.dtsi"
   7
   8 / {
   9         compatible = "glinet,ar300m", "qca,qca9533";
  10         model = "GL.iNet GL-AR300M";
  11
  12         memory@0 {
  13                 device_type = "memory";
  14                 reg = <0x0 0x8000000>;
  15         };
  16
  17         extosc: ref {
  18                 compatible = "fixed-clock";
  19                 #clock-cells = <0>;
  20                 clock-output-names = "ref";
  21                 clock-frequency = <25000000>;
  22         };
  23
  24         keys {
  25                 compatible = "gpio-keys-polled";
  26                 #address-cells = <1>;
  27                 #size-cells = <0>;
  28                 poll-interval = <20>;
  29                 pinctrl-names = "default";
  30                 pinctrl-0 = <&jtag_disable_pins>;
  31
  32                 button@0 {
  33                         label = "reset";
  34                         linux,code = <KEY_RESTART>;
  35                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 button@1 {
  39                         label = "button right";
  40                         linux,code = <BTN_0>;
  41                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  42                 };
  43
  44                 button@3 {
  45                         label = "button left";
  46                         linux,code = <BTN_1>;
  47                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  48                 };
  49         };
  50
  51         leds {
  52                 compatible = "gpio-leds";
  53
  54                 usb {
  55                         label = "gl-ar300m:green:usb";
  56                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  57                         trigger-sources = <&hub_port>;
  58                         linux,default-trigger = "usbport";
  59                 };
  60
  61                 wlan {
  62                         label = "gl-ar300m:green:wlan";
  63                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  64                         linux,default-trigger = "phy0tpt";
  65                 };
  66
  67                 lan {
  68                         label = "gl-ar300m:green:lan";
  69                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  70                 };
  71
  72                 status {
  73                         label = "gl-ar300m:green:status";
  74                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  75                 };
  76         };
  77 };
  78
  79 &pcie0 {
  80         status = "okay";
  81 };
  82
  83 &uart {
  84         status = "okay";
  85 };
  86
  87 &usb0 {
  88         status = "okay";
  89
  90         hub_port: port@1 {
  91                 reg = <1>;
  92                 #trigger-soruce-cells = <0>;
  93         };
  94 };
  95
  96 &usb_phy {
  97         status = "okay";
  98 };
  99
 100 &pll {
 101         clocks = <&extosc>;
 102 };
 103
 104 &mdio0 {
 105         status = "okay";
 106
 107         phy4: ethernet-phy@4 {
 108                 reg = <4>;
 109                 phy-mode = "mii";
 110         };
 111 };
 112
 113 &mdio1 {
 114         status = "okay";
 115 };
 116
 117 &eth0 {
 118         status = "okay";
 119
 120         mtd-mac-address = <&art 0x0>;
 121         phy-handle = <&phy4>;
 122         phy-mode = "mii";
 123 };
 124
 125 &eth1 {
 126         status = "okay";
 127
 128         mtd-mac-address = <&art 0x6>;
 129         phy-mode = "gmii";
 130
 131         fixed-link {
 132                 speed = <1000>;
 133                 full-duplex;
 134         };
 135 };
 136
 137 &wmac {
 138         status = "okay";
 139         mtd-cal-data = <&art 0x1000>;
 140         mtd-mac-address = <&art 0x1002>;
 141 };