target/linux/ath79/dts/qca9533_tplink_tl-wr841.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9533.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-status = &system;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 wifi {
  22                         label = "tp-link:green:wlan";
  23                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  24                         default-state = "off";
  25                         linux,default-trigger = "phy0tpt";
  26                 };
  27
  28                 system: wifi_qss {
  29                         label = "tp-link:green:qss";
  30                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  31                         default-state = "off";
  32                 };
  33
  34                 wan {
  35                         label = "tp-link:green:wan";
  36                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  37                         default-state = "off";
  38                 };
  39
  40                 lan1 {
  41                         label = "tp-link:green:lan1";
  42                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  43                         default-state = "off";
  44                 };
  45
  46                 lan2 {
  47                         label = "tp-link:green:lan2";
  48                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  49                         default-state = "off";
  50                 };
  51
  52                 lan3 {
  53                         label = "tp-link:green:lan3";
  54                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  55                         default-state = "off";
  56                 };
  57
  58                 lan4 {
  59                         label = "tp-link:green:lan4";
  60                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  61                         default-state = "off";
  62                 };
  63         };
  64
  65         keys {
  66                 compatible = "gpio-keys";
  67
  68                 reset {
  69                         label = "Reset button";
  70                         linux,code = <KEY_RESTART>;
  71                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  72                         debounce-interval = <60>;
  73                 };
  74
  75                 rfkill {
  76                         label = "RFKILL button";
  77                         linux,code = <KEY_RFKILL>;
  78                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  79                         debounce-interval = <60>;
  80                 };
  81         };
  82 };
  83
  84 &uart {
  85         status = "okay";
  86 };
  87
  88 &spi {
  89         status = "okay";
  90         num-cs = <1>;
  91
  92         flash@0 {
  93                 compatible = "jedec,spi-nor";
  94                 reg = <0>;
  95                 spi-max-frequency = <25000000>;
  96
  97                 partitions {
  98                         compatible = "fixed-partitions";
  99                         #address-cells = <1>;
 100                         #size-cells = <1>;
 101
 102                         uboot:  partition@0 {
 103                                 label = "u-boot";
 104                                 reg = <0x000000 0x020000>;
 105                                 read-only;
 106                         };
 107
 108                         partition@20000 {
 109                                 label = "firmware";
 110                                 reg = <0x020000 0x3d0000>;
 111                         };
 112
 113                         art: partition@3f0000 {
 114                                 label = "art";
 115                                 reg = <0x3f0000 0x010000>;
 116                                 read-only;
 117                         };
 118                 };
 119         };
 120 };
 121
 122 &eth1 {
 123         mtd-mac-address = <&uboot 0x1fc00>;
 124 };
 125
 126 &eth0 {
 127         status = "okay";
 128         phy-handle = <&swphy4>;
 129
 130         mtd-mac-address = <&uboot 0x1fc00>;
 131         mtd-mac-address-increment = <1>;
 132 };
 133
 134 &wmac {
 135         status = "okay";
 136         mtd-cal-data = <&art 0x1000>;
 137         mtd-mac-address = <&uboot 0x1fc00>;
 138 };