1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca9557.dtsi"
10 compatible = "mikrotik,routerboard-wap-g-5hact2hnd", "qca,qca9556";
11 model = "MikroTik RouterBOARD wAP G-5HacT2HnD";
14 label-mac-device = ð1;
20 bootargs = "console=ttyS0,115200n8";
24 compatible = "gpio-keys";
28 linux,code = <KEY_RESTART>;
29 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
30 debounce-interval = <60>;
35 compatible = "virtual,mdio-gpio";
37 gpios = <&gpio 12 GPIO_ACTIVE_HIGH>, /* MDC */
38 <&gpio 11 GPIO_ACTIVE_HIGH>; /* MDIO */
42 phy0: ethernet-phy@0 {
44 device_type = "ethernet-phy";
48 at803x-override-sgmii-link-check;
56 mtd-mac-address = <&hard_config 0x10>;
58 pll-data = <0x03000101 0x80000101 0x80001313>;
74 compatible = "jedec,spi-nor";
76 spi-max-frequency = <50000000>;
79 compatible = "fixed-partitions";
87 compatible = "fixed-partitions";
92 label = "bootloader1";
97 hard_config: partition@e000 {
98 label = "hard_config";
99 reg = <0xe000 0x1000>;
105 reg = <0xf000 0x1000>;
110 label = "bootloader2";
111 reg = <0x10000 0xf000>;
116 label = "soft_config";
117 reg = <0x1f000 0x1000>;
122 compatible = "mikrotik,minor";
124 reg = <0x020000 0xfe0000>;
144 compatible = "qcom,ath10k";