1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca955x.dtsi"
10 compatible = "mikrotik,routerboard-wap-g-5hact2hnd", "qca,qca9556";
11 model = "MikroTik RouterBOARD wAP G-5HacT2HnD";
19 bootargs = "console=ttyS0,115200n8";
23 compatible = "gpio-keys";
27 linux,code = <KEY_RESTART>;
28 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
29 debounce-interval = <60>;
34 compatible = "virtual,mdio-gpio";
36 gpios = <&gpio 12 GPIO_ACTIVE_HIGH>, /* MDC */
37 <&gpio 11 GPIO_ACTIVE_HIGH>; /* MDIO */
41 phy0: ethernet-phy@0 {
43 device_type = "ethernet-phy";
47 at803x-override-sgmii-link-check;
55 pll-data = <0x03000101 0x80000101 0x80001313>;
71 compatible = "jedec,spi-nor";
73 spi-max-frequency = <40000000>;
76 compatible = "fixed-partitions";
84 compatible = "mikrotik,routerboot-partitions";
89 label = "bootloader1";
94 hard_config: hard_config {
104 label = "bootloader2";
110 label = "soft_config";
115 compatible = "mikrotik,minor";
117 reg = <0x020000 0xfe0000>;
137 compatible = "qcom,ath10k";