1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include <dt-bindings/leds/common.h>
5 #include "qca955x_dlink_dap-2xxx.dtsi"
8 compatible = "dlink,dap-2660-a1", "qca,qca9557";
9 model = "D-Link DAP-2660 A1";
12 led-boot = &led_power_green;
13 led-failsafe = &led_power_red;
14 led-running = &led_power_green;
15 led-upgrade = &led_power_red;
19 compatible = "gpio-keys";
23 linux,code = <KEY_RESTART>;
24 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
29 compatible = "gpio-leds";
31 led_power_red: power_red {
32 function = LED_FUNCTION_POWER;
33 color = <LED_COLOR_ID_RED>;
34 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
37 led_power_green: power_green {
38 function = LED_FUNCTION_POWER;
39 color = <LED_COLOR_ID_GREEN>;
40 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
49 reg = <0x70000 0xee0000>;
55 reg = <0xf50000 0xa0000>;
63 phy4: ethernet-phy@4 {
71 pll-data = <0x82000000 0x80000101 0x80001313>;
74 phy-mode = "rgmii-id";
88 compatible = "qcom,ath10k";
91 nvmem-cells = <&cal_ath10k>;
92 nvmem-cell-names = "calibration";
98 compatible = "fixed-layout";
102 cal_ath9k: calibration@1000 {
103 reg = <0x1000 0x440>;
106 cal_ath10k: calibration@5000 {
107 reg = <0x5000 0x844>;