1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca955x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "extreme-networks,ws-ap3805i", "qca,qca9557";
10 model = "Extreme Networks WS-AP3805i";
13 led-boot = &led_power_green;
14 led-failsafe = &led_power_amber;
15 led-running = &led_power_green;
16 led-upgrade = &led_power_amber;
17 label-mac-device = ð0;
21 compatible = "gpio-leds";
23 led_power_green: power_green {
24 label = "green:power";
25 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
28 led_power_amber: power_amber {
29 label = "amber:power";
30 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
34 label = "green:wlan5";
35 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
36 linux,default-trigger = "phy0tpt";
40 label = "green:wlan2";
41 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
42 linux,default-trigger = "phy1tpt";
47 compatible = "gpio-keys";
51 linux,code = <KEY_RESTART>;
52 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
57 compatible = "linux,wdt-gpio";
58 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
60 hw_margin_ms = <20000>;
79 compatible = "qcom,ath10k";
87 phy5: ethernet-phy@5 {
96 phy-mode = "rgmii-id";
98 pll-data = <0x82000000 0x80000101 0x80001313>;
110 compatible = "jedec,spi-nor";
112 spi-max-frequency = <50000000>;
116 compatible = "fixed-partitions";
117 #address-cells = <1>;
121 label = "u-boot-bak";
128 reg = <0x080000 0x80000>;
134 reg = <0x100000 0x40000>;
140 reg = <0x140000 0x40000>;
146 reg = <0x180000 0x40000>;
152 reg = <0x1c0000 0x40000>;
158 reg = <0x200000 0x40000>;
164 reg = <0x240000 0x40000>;
170 reg = <0x280000 0x1000000>;
176 reg = <0x1280000 0x1000000>;
182 compatible = "denx,uimage";
183 reg = <0x2280000 0x1cc0000>;
188 reg = <0x3f40000 0x80000>;
194 reg = <0x3fc0000 0x40000>;