1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca955x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 model = "Belkin F9J1108 v2 (AC1750 DB Wi-Fi)";
10 compatible = "belkin,f9j1108-v2", "qca,qca9558";
13 led-boot = &led_system;
14 led-failsafe = &led_system;
15 led-running = &led_system;
16 led-upgrade = &led_system;
17 label-mac-device = ð1;
21 compatible = "gpio-leds";
25 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
26 trigger-sources = <&hub_port0>;
27 linux,default-trigger = "usbport";
31 label = "amber:status";
32 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
37 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
42 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
46 label = "blue:system";
47 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
52 compatible = "gpio-export";
56 gpio-export,name = "usb2:power";
57 gpio-export,output = <1>;
58 gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
63 compatible = "gpio-keys";
67 linux,code = <KEY_WPS_BUTTON>;
68 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
69 debounce-interval = <60>;
73 label = "Reset button";
74 linux,code = <KEY_RESTART>;
75 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
76 debounce-interval = <60>;
81 compatible = "mtd-concat";
83 devices = <&fwpart1 &fwpart2>;
86 compatible = "fixed-partitions";
91 compatible = "openwrt,okli";
112 #address-cells = <1>;
118 #trigger-source-cells = <0>;
126 compatible = "jedec,spi-nor";
128 spi-max-frequency = <80000000>;
132 compatible = "fixed-partitions";
133 #address-cells = <1>;
138 reg = <0x000000 0x040000>;
143 label = "u-boot-env";
144 reg = <0x040000 0x010000>;
147 fwpart1: partition@50000 {
149 reg = <0x050000 0xe20000>;
154 reg = <0xe70000 0x10000>;
158 fwpart2: partition@e80000 {
160 reg = <0xe80000 0x170000>;
163 art: partition@ff0000 {
165 reg = <0xff0000 0x010000>;
174 phy0: ethernet-phy@0 {
177 qca,ar8327-initvals = <
178 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
179 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
180 0x50 0xc737c737 /* LED_CTRL0 */
181 0x54 0x00000000 /* LED_CTRL1 */
182 0x58 0x00000000 /* LED_CTRL2 */
183 0x5c 0x0030c300 /* LED_CTRL3 */
184 0x7c 0x0000007e /* PORT0_STATUS */
185 0x94 0x0000007e /* PORT6 STATUS */
193 mtd-mac-address = <&art 0x0>;
194 phy-handle = <&phy0>;
195 pll-data = <0xa6000000 0x00000101 0x00001616>;
206 mtd-mac-address = <&art 0x0>;
207 mtd-mac-address-increment = <(-1)>;
208 pll-data = <0x03000101 0x00000101 0x00001616>;
220 compatible = "qcom,ath10k";
228 mtd-cal-data = <&art 0x1000>;