1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 * The hardware of this board family is most likely shared with other devices
5 * from other manufacturers.
6 * Devolo seems to use hardware from Edimax, namely the Edimax WAP1750.
8 * The base board is identical but the single models differ in number of
9 * buttons, ethernet ports, external console, USB, external / internal
10 * antennas and number of spatial streams.
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/input/input.h>
16 #include "qca955x.dtsi"
20 compatible = "gpio-keys";
23 label = "Reset button";
24 linux,code = <KEY_RESTART>;
25 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
26 debounce-interval = <60>;
31 compatible = "linux,wdt-gpio";
32 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
53 compatible = "jedec,spi-nor";
55 spi-max-frequency = <25000000>;
58 compatible = "fixed-partitions";
64 reg = <0x000000 0x040000>;
70 reg = <0x040000 0x010000>;
74 art: partition@50000 {
76 reg = <0x050000 0x010000>;
82 reg = <0x060000 0x010000>;
87 compatible = "denx,uimage";
89 reg = <0x070000 0xf90000>;
98 phy4: ethernet-phy@4 {
108 mtd-mac-address = <&art 0x00>;
109 phy-handle = <&phy4>;
110 phy-mode = "rgmii-rxid";
111 pll-data = <0xae000000 0x80000101 0x80001313>;
113 gmac_config: gmac-config {
125 phy1: ethernet-phy@1 {
127 at803x-override-sgmii-link-check;
132 mtd-mac-address = <&art 0x00>;
133 mtd-mac-address-increment = <1>;
135 phy-handle = <&phy1>;
136 pll-data = <0x03000101 0x00000101 0x00001313>;
144 mtd-cal-data = <&art 0x1000>;
145 mtd-mac-address = <&art 0x00>;
146 mtd-mac-address-increment = <(-2)>;