1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 * The hardware of this board family is most likely shared with other devices
5 * from other manufacturers.
6 * Devolo seems to use hardware from Edimax, namely the Edimax WAP1750.
8 * The base board is identical but the single models differ in number of
9 * buttons, ethernet ports, external console, USB, external / internal
10 * antennas and number of spatial streams.
13 #include "qca955x.dtsi"
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/input/input.h>
20 compatible = "gpio-keys";
23 label = "Reset button";
24 linux,code = <KEY_RESTART>;
25 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
26 debounce-interval = <60>;
31 compatible = "linux,wdt-gpio";
32 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
43 compatible = "qcom,ath10k";
44 reg = <0x0000 0 0 0 0>;
45 nvmem-cells = <&cal_art_5000>, <&macaddr_art_0 (-1)>;
46 nvmem-cell-names = "calibration", "mac-address";
54 compatible = "jedec,spi-nor";
56 spi-max-frequency = <25000000>;
59 compatible = "fixed-partitions";
65 reg = <0x000000 0x040000>;
71 reg = <0x040000 0x010000>;
75 art: partition@50000 {
77 reg = <0x050000 0x010000>;
81 compatible = "fixed-layout";
85 macaddr_art_0: macaddr@0 {
86 compatible = "mac-base";
88 #nvmem-cell-cells = <1>;
91 cal_art_5000: calibration@5000 {
99 reg = <0x060000 0x010000>;
104 compatible = "denx,uimage";
106 reg = <0x070000 0xf90000>;
115 phy4: ethernet-phy@4 {
125 nvmem-cells = <&macaddr_art_0 0>;
126 nvmem-cell-names = "mac-address";
127 phy-handle = <&phy4>;
129 gmac_config: gmac-config {
139 mtd-cal-data = <&art 0x1000>;
140 nvmem-cells = <&macaddr_art_0 (-2)>;
141 nvmem-cell-names = "mac-address";