1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca955x.dtsi"
10 compatible = "domywifi,dw33d", "qca,qca9558";
11 model = "DomyWifi DW33D";
14 led-boot = &led_system;
15 led-failsafe = &led_system;
16 led-running = &led_system;
17 led-upgrade = &led_system;
21 compatible = "gpio-leds";
24 label = "dw33d:blue:system";
25 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
29 label = "dw33d:blue:mmc";
30 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
31 trigger-sources = <&hub_port0>;
32 linux,default-trigger = "usbport";
36 label = "dw33d:blue:usb";
37 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
38 trigger-sources = <&hub_port1>;
39 linux,default-trigger = "usbport";
43 label = "dw33d:blue:wlan2g";
44 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
45 linux,default-trigger = "phy1tpt";
49 label = "dw33d:blue:internet";
50 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
55 compatible = "gpio-keys";
58 label = "Reset button";
59 linux,code = <KEY_RESTART>;
60 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
61 debounce-interval = <60>;
70 compatible = "qcom,ath10k";
90 #trigger-source-cells = <0>;
105 #trigger-source-cells = <0>;
115 compatible = "jedec,spi-nor";
117 spi-max-frequency = <25000000>;
120 compatible = "fixed-partitions";
121 #address-cells = <1>;
131 label = "u-boot-env";
132 reg = <0x40000 0x10000>;
136 label = "oem-firmware";
137 reg = <0x50000 0xfa0000>;
140 art: partition@ff0000 {
142 reg = <0xff0000 0x10000>;
153 compatible = "fixed-partitions";
154 #address-cells = <1>;
159 reg = <0x0 0x500000>;
164 reg = <0x500000 0x5b00000>;
168 label = "oem-backup";
169 reg = <0x6000000 0x2000000>;
177 phy0: ethernet-phy@0 {
180 qca,ar8327-initvals = <
181 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
182 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
183 0x7c 0x0000007e /* PORT0_STATUS */
184 0x94 0x0000007e /* PORT6 STATUS */
192 mtd-mac-address = <&art 0x0>;
193 pll-data = <0x56000000 0x00000101 0x00001616>;
194 phy-handle = <&phy0>;
200 mtd-mac-address = <&art 0x6>;
201 pll-data = <0x03000101 0x00000101 0x00001616>;
211 mtd-cal-data = <&art 0x1000>;
212 mtd-mac-address = <&art 0xc>;