1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca955x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 model = "EnGenius EPG5000";
10 compatible = "engenius,epg5000", "qca,qca9558";
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
20 compatible = "gpio-leds";
23 label = "amber:power";
24 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
29 label = "blue:wlan2g";
30 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
31 linux,default-trigger = "phy1tpt";
35 label = "blue:wlan5g";
36 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
37 linux,default-trigger = "phy0tpt";
42 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
47 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
52 compatible = "gpio-keys";
56 linux,code = <KEY_RESTART>;
57 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
58 debounce-interval = <60>;
63 linux,code = <KEY_WPS_BUTTON>;
64 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
65 debounce-interval = <60>;
74 pll-data = <0xa6000000 0x00000101 0x00001616>;
80 phy0: ethernet-phy@0 {
83 qca,ar8327-initvals = <
84 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
85 0x7c 0x0000007e /* PORT0_STATUS */
94 compatible = "pci168c,003c";
95 reg = <0x0000 0 0 0 0>;
103 compatible = "jedec,spi-nor";
105 spi-max-frequency = <25000000>;
108 compatible = "fixed-partitions";
109 #address-cells = <1>;
114 reg = <0x000000 0x030000>;
119 label = "u-boot-env";
120 reg = <0x030000 0x010000>;
124 compatible = "denx,uimage";
126 reg = <0x040000 0xe50000>;
130 label = "manufacture";
131 reg = <0xe90000 0x100000>;
137 reg = <0xf90000 0x010000>;
143 reg = <0xfa0000 0x050000>;
149 reg = <0xff0000 0x010000>;