target/linux/ath79/dts/qca9558_librerouter_librerouter-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "librerouter,librerouter-v1", "qca,qca9558";
  10         model = "LibreRouter v1";
  11
  12         aliases {
  13                 led-boot = &led_system;
  14                 led-failsafe = &led_system;
  15                 led-running = &led_system;
  16                 led-upgrade = &led_system;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_system: system {
  23                         label = "green:system";
  24                         gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
  25                         default-state = "on";
  26                 };
  27
  28                 wifi_green {
  29                         label = "green:wlan2g";
  30                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  31                         linux,default-trigger = "phy0tpt";
  32                 };
  33
  34                 status_blue {
  35                         label = "blue:status";
  36                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys";
  42
  43                 pinctrl-names = "default";
  44                 /* GPIO1 (poe_pass) and GPIO2 (watchdog) requires jtag disabled */
  45                 pinctrl-0 = <&jtag_disable_pins>;
  46
  47                 reset {
  48                         label = "Reset";
  49                         linux,code = <KEY_RESTART>;
  50                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  51                         debounce-interval = <60>;
  52                 };
  53         };
  54
  55         watchdog {
  56                 compatible = "linux,wdt-gpio";
  57                 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  58                 hw_algo = "toggle";
  59                 hw_margin_ms = <1000>;
  60                 always-running;
  61         };
  62 };
  63
  64 &pcie0 {
  65         status = "okay";
  66
  67         wifi@0,0 {
  68                 compatible = "pci168c,0033";
  69                 reg = <0x0000 0 0 0 0>;
  70         };
  71 };
  72
  73 &pcie1 {
  74         status = "okay";
  75
  76         wifi@0,0 {
  77                 compatible = "pci168c,0033";
  78                 reg = <0x0000 0 0 0 0>;
  79         };
  80 };
  81
  82 &usb_phy0 {
  83         status = "okay";
  84 };
  85
  86 &usb0 {
  87         #address-cells = <1>;
  88         #size-cells = <0>;
  89         status = "okay";
  90 };
  91
  92 &usb_phy1 {
  93         status = "okay";
  94 };
  95
  96 &usb1 {
  97         #address-cells = <1>;
  98         #size-cells = <0>;
  99         status = "okay";
 100 };
 101
 102 &spi {
 103         status = "okay";
 104
 105         flash@0 {
 106                 compatible = "jedec,spi-nor";
 107                 reg = <0>;
 108                 spi-max-frequency = <25000000>;
 109
 110                 partitions {
 111                         compatible = "fixed-partitions";
 112                         #address-cells = <1>;
 113                         #size-cells = <1>;
 114
 115                         partition@0 {
 116                                 label = "u-boot";
 117                                 reg = <0x000000 0x040000>;
 118                                 read-only;
 119                         };
 120
 121                         partition@40000 {
 122                                 label = "u-boot-env";
 123                                 reg = <0x040000 0x010000>;
 124                         };
 125
 126                         partition@50000 {
 127                                 compatible = "denx,uimage";
 128                                 label = "firmware";
 129                                 reg = <0x050000 0x7c0000>;
 130                         };
 131
 132                         partition@810000 {
 133                                 label = "fw2";
 134                                 reg = <0x810000 0x7d0000>;
 135                         };
 136
 137                         partition@fd0000 {
 138                                 label = "res";
 139                                 reg = <0xfd0000 0x20000>;
 140                         };
 141
 142                         art: partition@ff0000 {
 143                                 label = "art";
 144                                 reg = <0xff0000 0x010000>;
 145                                 read-only;
 146                         };
 147                 };
 148         };
 149 };
 150
 151 &mdio0 {
 152         status = "okay";
 153
 154         phy0: ethernet-phy@0 {
 155                 reg = <0>;
 156                 qca,ar8327-initvals = <
 157                         0x04 0x87600000 /* PORT0: RGMII, MAC0/6 exchage, tx_delay 01, rx_delay 10 */
 158                         0x0c 0x00000080 /* PORT6: SGMII */
 159                         0x10 0x81000080 /* POWER_ON_STRAP: LED open drain, SerDes auto-neg disabled */
 160                         0x50 0xcf37cf37 /* LED_CTRL0 */
 161                         0x54 0xcf37cf37 /* LED_CTRL1 */
 162                         0x58 0xcf37cf37 /* LED_CTRL2 */
 163                         0x5c 0x0        /* LED_CTRL3 */
 164                         0x7c 0x0000007e /* PORT0_STATUS */
 165                         0x94 0x0000007e /* PORT6 STATUS */
 166                 >;
 167         };
 168 };
 169
 170 &eth0 {
 171         status = "okay";
 172
 173         pll-data = <0xa6000000 0x00000101 0x00001616>;
 174         nvmem-cells = <&macaddr_art_0>;
 175         nvmem-cell-names = "mac-address";
 176
 177         phy-handle = <&phy0>;
 178 };
 179
 180 &eth1 {
 181         status = "okay";
 182
 183         pll-data = <0x03000101 0x00000101 0x00001616>;
 184         nvmem-cells = <&macaddr_art_6>;
 185         nvmem-cell-names = "mac-address";
 186
 187         fixed-link {
 188                 speed = <1000>;
 189                 full-duplex;
 190         };
 191 };
 192
 193 &wmac {
 194         status = "okay";
 195
 196         mtd-cal-data = <&art 0x1000>;
 197         nvmem-cells = <&macaddr_art_c>;
 198         nvmem-cell-names = "mac-address";
 199 };
 200
 201 &art {
 202         compatible = "nvmem-cells";
 203         #address-cells = <1>;
 204         #size-cells = <1>;
 205
 206         macaddr_art_0: macaddr@0 {
 207                 reg = <0x0 0x6>;
 208         };
 209
 210         macaddr_art_6: macaddr@6 {
 211                 reg = <0x6 0x6>;
 212         };
 213
 214         macaddr_art_c: macaddr@c {
 215                 reg = <0xc 0x6>;
 216         };
 217 };