1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca955x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "ocedo,ursus", "qca,qca9558";
10 model = "OCEDO Ursus";
13 compatible = "gpio-leds";
16 label = "green:wlan2g";
17 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
18 linux,default-trigger = "phy1tpt";
22 label = "green:wlan5g";
23 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
24 linux,default-trigger = "phy0tpt";
41 compatible = "jedec,spi-nor";
43 spi-max-frequency = <50000000>;
46 compatible = "fixed-partitions";
52 reg = <0x000000 0x040000>;
58 reg = <0x040000 0x010000>;
62 compatible = "denx,uimage";
64 reg = <0x050000 0x740000>;
69 reg = <0x790000 0x740000>;
75 reg = <0xed0000 0x110000>;
81 reg = <0xfe0000 0x010000>;
85 art: partition@ff0000 {
87 reg = <0xff0000 0x010000>;
97 mtd-cal-data = <&art 0x1000>;
98 nvmem-cells = <&macaddr_art_6>;
99 nvmem-cell-names = "mac-address";
105 phy1: ethernet-phy@1 {
109 phy2: ethernet-phy@2 {
111 at803x-override-sgmii-link-check;
117 nvmem-cells = <&macaddr_art_0>;
118 nvmem-cell-names = "mac-address";
120 phy-mode = "rgmii-rxid";
121 phy-handle = <&phy1>;
122 pll-data = <0x8e000000 0x80000101 0x80001313>;
124 gmac_config: gmac-config {
137 nvmem-cells = <&macaddr_art_12>;
138 nvmem-cell-names = "mac-address";
139 phy-handle = <&phy2>;
140 pll-data = <0x3000101 0x101 0x1313>;
145 compatible = "nvmem-cells";
146 #address-cells = <1>;
149 macaddr_art_0: macaddr@0 {
153 macaddr_art_6: macaddr@6 {
157 macaddr_art_12: macaddr@12 {