1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca955x.dtsi"
10 compatible = "ocedo,ursus", "qca,qca9558";
11 model = "OCEDO Ursus";
14 compatible = "gpio-leds";
17 label = "ursus:green:wlan2g";
18 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
19 linux,default-trigger = "phy1tpt";
23 label = "ursus:green:wlan5g";
24 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
25 linux,default-trigger = "phy0tpt";
47 compatible = "jedec,spi-nor";
49 spi-max-frequency = <25000000>;
52 compatible = "fixed-partitions";
58 reg = <0x000000 0x040000>;
64 reg = <0x040000 0x010000>;
68 compatible = "denx,uimage";
70 reg = <0x050000 0x740000>;
75 reg = <0x790000 0x740000>;
81 reg = <0xed0000 0x110000>;
87 reg = <0xfe0000 0x010000>;
91 art: partition@ff0000 {
93 reg = <0xff0000 0x010000>;
103 mtd-cal-data = <&art 0x1000>;
104 mtd-mac-address = <&art 0x06>;
110 phy1: ethernet-phy@1 {
114 phy2: ethernet-phy@2 {
116 at803x-override-sgmii-link-check;
122 mtd-mac-address = <&art 0x00>;
124 phy-mode = "rgmii-rxid";
125 phy-handle = <&phy1>;
126 pll-data = <0x8e000000 0x80000101 0x80001313>;
128 gmac_config: gmac-config {
141 mtd-mac-address = <&art 0x12>;
142 phy-handle = <&phy2>;
143 pll-data = <0x3000101 0x101 0x1313>;