1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca955x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "ocedo,ursus", "qca,qca9558";
10 model = "OCEDO Ursus";
13 compatible = "gpio-leds";
16 label = "green:wlan2g";
17 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
18 linux,default-trigger = "phy1tpt";
22 label = "green:wlan5g";
23 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
24 linux,default-trigger = "phy0tpt";
37 compatible = "jedec,spi-nor";
39 spi-max-frequency = <50000000>;
42 compatible = "fixed-partitions";
48 reg = <0x000000 0x040000>;
54 reg = <0x040000 0x010000>;
58 /* Dual-Flash layout combined */
59 compatible = "denx,uimage";
61 reg = <0x050000 0xe80000>;
66 reg = <0xed0000 0x110000>;
72 reg = <0xfe0000 0x010000>;
76 art: partition@ff0000 {
78 reg = <0xff0000 0x010000>;
82 compatible = "fixed-layout";
86 macaddr_art_0: macaddr@0 {
90 macaddr_art_6: macaddr@6 {
94 macaddr_art_12: macaddr@12 {
106 mtd-cal-data = <&art 0x1000>;
107 nvmem-cells = <&macaddr_art_6>;
108 nvmem-cell-names = "mac-address";
114 phy1: ethernet-phy@1 {
118 phy2: ethernet-phy@2 {
120 at803x-override-sgmii-link-check;
126 nvmem-cells = <&macaddr_art_0>;
127 nvmem-cell-names = "mac-address";
129 phy-mode = "rgmii-rxid";
130 phy-handle = <&phy1>;
131 pll-data = <0x8e000000 0x80000101 0x80001313>;
133 gmac_config: gmac-config {
146 nvmem-cells = <&macaddr_art_12>;
147 nvmem-cell-names = "mac-address";
148 phy-handle = <&phy2>;
149 pll-data = <0x3000101 0x101 0x1313>;