1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca955x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "ocedo,ursus", "qca,qca9558";
10 model = "OCEDO Ursus";
13 compatible = "gpio-leds";
16 label = "green:wlan2g";
17 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
18 linux,default-trigger = "phy1tpt";
22 label = "green:wlan5g";
23 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
24 linux,default-trigger = "phy0tpt";
37 compatible = "jedec,spi-nor";
39 spi-max-frequency = <50000000>;
42 compatible = "fixed-partitions";
48 reg = <0x000000 0x040000>;
54 reg = <0x040000 0x010000>;
58 compatible = "denx,uimage";
60 reg = <0x050000 0x740000>;
65 reg = <0x790000 0x740000>;
71 reg = <0xed0000 0x110000>;
77 reg = <0xfe0000 0x010000>;
81 art: partition@ff0000 {
83 reg = <0xff0000 0x010000>;
93 mtd-cal-data = <&art 0x1000>;
94 nvmem-cells = <&macaddr_art_6>;
95 nvmem-cell-names = "mac-address";
101 phy1: ethernet-phy@1 {
105 phy2: ethernet-phy@2 {
107 at803x-override-sgmii-link-check;
113 nvmem-cells = <&macaddr_art_0>;
114 nvmem-cell-names = "mac-address";
116 phy-mode = "rgmii-rxid";
117 phy-handle = <&phy1>;
118 pll-data = <0x8e000000 0x80000101 0x80001313>;
120 gmac_config: gmac-config {
133 nvmem-cells = <&macaddr_art_12>;
134 nvmem-cell-names = "mac-address";
135 phy-handle = <&phy2>;
136 pll-data = <0x3000101 0x101 0x1313>;
141 compatible = "nvmem-cells";
142 #address-cells = <1>;
145 macaddr_art_0: macaddr@0 {
149 macaddr_art_6: macaddr@6 {
153 macaddr_art_12: macaddr@12 {