1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca955x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "openmesh,om5p-ac-v2", "qca,qca9558";
10 model = "OpenMesh OM5P-AC V2";
13 compatible = "fixed-clock";
15 clock-output-names = "ref";
16 clock-frequency = <40000000>;
20 compatible = "gpio-leds";
24 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
29 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
33 label = "yellow:wifi";
34 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
39 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
44 compatible = "gpio-keys";
48 linux,code = <KEY_RESTART>;
49 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
54 compatible = "gpio-export";
58 gpio-export,name = "om5pac:pa_dcdc";
59 gpio-export,output = <1>;
60 gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
63 gpio-export,name = "om5pac:pa_high";
64 gpio-export,output = <1>;
65 gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
72 pinctrl-single,bits = <0x0 0xff00 0x0>;
76 pinctrl-single,bits = <0x10 0xff 0x0>;
92 compatible = "jedec,spi-nor";
94 spi-max-frequency = <25000000>;
97 compatible = "fixed-partitions";
103 reg = <0x000000 0x040000>;
108 label = "u-boot-env";
109 reg = <0x040000 0x010000>;
113 compatible = "denx,uimage";
115 reg = <0x850000 0x7a0000>;
120 reg = <0xff0000 0x010000>;
130 phy4: ethernet-phy@4 {
132 phy-mode = "rgmii-id";
139 phy1: ethernet-phy@1 {
148 pll-data = <0x82000101 0x80000101 0x80001313>;
150 phy-handle = <&phy4>;
156 pll-data = <0x03000101 0x80000101 0x80001313>;
158 phy-handle = <&phy1>;