1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca955x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 model = "Sitecom WLR-8100 (X8 AC1750)";
10 compatible = "sitecom,wlr-8100", "qca,qca9558";
13 led-boot = &led_status_amber;
14 led-failsafe = &led_status_amber;
15 led-running = &led_status_amber;
16 led-upgrade = &led_status_amber;
20 compatible = "gpio-keys";
23 label = "2.4GHz - RFKILL";
24 gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
25 linux,code = <KEY_RFKILL>;
29 label = "5GHz - RESTART";
30 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
31 linux,code = <KEY_RESTART>;
36 compatible = "gpio-leds";
38 led_status_amber: status_amber {
39 label = "amber:status";
40 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
46 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
50 label = "blue:wifi2g";
51 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
52 linux,default-trigger = "phy1tpt";
56 label = "blue:wifi5g";
57 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
58 linux,default-trigger = "phy0tpt";
67 compatible = "jedec,spi-nor";
69 spi-max-frequency = <25000000>;
72 compatible = "fixed-partitions";
78 reg = <0x000000 0x030000>;
84 reg = <0x030000 0x010000>;
89 compatible = "denx,uimage";
91 reg = <0x040000 0xf10000>;
95 label = "manufacture";
96 reg = <0xf50000 0x040000>;
102 reg = <0xf90000 0x010000>;
108 reg = <0xfa0000 0x050000>;
112 art: partition@ff0000 {
114 reg = <0xff0000 0x010000>;
129 compatible = "qcom,ath10k";
145 phy0: ethernet-phy@0 {
148 qca,ar8327-initvals = <
149 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
150 0x50 0xcf37cf37 /* LED Control Register 0 */
151 0x54 0x00000000 /* LED Control Register 1 */
152 0x58 0x00000000 /* LED Control Register 2 */
153 0x5c 0x0030c300 /* LED Control Register 3 */
154 0x7c 0x0000007e /* PORT0_STATUS */
161 phy-handle = <&phy0>;
162 pll-data = <0xa6000000 0x00000101 0x00001616>;