1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca9557.dtsi"
10 model = "Sitecom WLR-8100 (X8 AC1750)";
11 compatible = "sitecom,wlr-8100", "qca,qca9558";
14 bootargs = "console=ttyS0,115200n8";
18 led-boot = &led_status_amber;
19 led-failsafe = &led_status_amber;
20 led-running = &led_status_amber;
21 led-upgrade = &led_status_amber;
25 compatible = "gpio-keys";
28 label = "2.4GHz - RFKILL";
29 gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
30 linux,code = <KEY_RFKILL>;
34 label = "5GHz - RESTART";
35 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
36 linux,code = <KEY_RESTART>;
41 compatible = "gpio-leds";
43 led_status_amber: status_amber {
44 label = "wlr-8100:amber:status";
45 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
50 label = "wlr-8100:white:ops";
51 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
55 label = "wlr-8100:blue:wifi2g";
56 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
57 linux,default-trigger = "phy1tpt";
61 label = "wlr-8100:blue:wifi5g";
62 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
63 linux,default-trigger = "phy0tpt";
74 compatible = "jedec,spi-nor";
76 spi-max-frequency = <25000000>;
79 compatible = "fixed-partitions";
85 reg = <0x000000 0x030000>;
91 reg = <0x030000 0x010000>;
96 compatible = "denx,uimage";
98 reg = <0x040000 0xf10000>;
102 label = "manufacture";
103 reg = <0xf50000 0x040000>;
109 reg = <0xf90000 0x010000>;
115 reg = <0xfa0000 0x050000>;
119 art: partition@ff0000 {
121 reg = <0xff0000 0x010000>;
136 compatible = "qcom,ath10k";
150 #address-cells = <1>;
158 phy0: ethernet-phy@0 {
161 qca,ar8327-initvals = <
162 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
163 0x50 0xc437c437 /* LED Control Register 0 */
164 0x54 0xc337c337 /* LED Control Register 1 */
165 0x58 0x00000000 /* LED Control Register 2 */
166 0x5c 0x03ffff00 /* LED Control Register 3 */
167 0x7c 0x0000007e /* PORT0_STATUS */
174 phy-handle = <&phy0>;
175 pll-data = <0xa6000000 0x00000101 0x00001616>;