1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca955x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
10 led-boot = &led_power;
11 led-failsafe = &led_power;
12 led-running = &led_power;
13 led-upgrade = &led_power;
15 label-mac-device = ð0;
19 compatible = "gpio-leds";
22 label = "tp-link:blue:power";
23 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
27 label = "tp-link:blue:wlan2g";
28 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
29 linux,default-trigger = "phy1tpt";
33 label = "tp-link:blue:wlan5g";
34 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
35 linux,default-trigger = "phy0tpt";
39 label = "tp-link:green:lan_link";
40 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
44 label = "tp-link:green:lan_data";
45 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
49 label = "tp-link:blue:wps";
50 gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
54 label = "tp-link:red:wps";
55 gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
60 compatible = "gpio-keys";
63 label = "Reset button";
64 linux,code = <KEY_RESTART>;
65 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
66 debounce-interval = <60>;
70 label = "LED control button";
72 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
73 debounce-interval = <60>;
78 linux,code = <KEY_WPS_BUTTON>;
79 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
80 debounce-interval = <60>;
85 compatible = "virtual,mdio-gpio";
87 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
88 <&gpio 1 GPIO_ACTIVE_HIGH>; /* MDIO */
92 phy4: ethernet-phy@4 {
94 reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
112 compatible = "jedec,spi-nor";
114 spi-max-frequency = <25000000>;
117 compatible = "fixed-partitions";
118 #address-cells = <1>;
123 reg = <0x000000 0x020000>;
128 compatible = "tplink,firmware";
130 reg = <0x020000 0x5e0000>;
134 label = "partition-table";
135 reg = <0x600000 0x010000>;
139 info: partition@610000 {
141 reg = <0x610000 0x020000>;
147 reg = <0x630000 0x1c0000>;
151 art: partition@7f0000 {
153 reg = <0x7f0000 0x010000>;
163 phy-handle = <&phy4>;
164 pll-data = <0xa6000000 0x00000101 0x00001616>;
166 mtd-mac-address = <&info 0x8>;
172 mtd-cal-data = <&art 0x1000>;
173 mtd-mac-address = <&info 0x8>;
174 mtd-mac-address-increment = <(-1)>;