target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wdr4900-v2", "qca,qca9558";
  11         model = "TP-Link TL-WDR4900 v2";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_system;
  19                 led-failsafe = &led_system;
  20                 led-running = &led_system;
  21                 led-upgrade = &led_system;
  22         };
  23
  24         gpio_leds: leds {
  25                 compatible = "gpio-leds";
  26
  27                 led_system: system {
  28                         label = "tp-link:blue:system";
  29                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  30                         default-state = "on";
  31                 };
  32
  33                 usb1 {
  34                         label = "tp-link:green:usb1";
  35                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  36                         default-state = "off";
  37                         trigger-sources = <&hub_port1>;
  38                         linux,default-trigger = "usbport";
  39                 };
  40
  41                 usb2 {
  42                         label = "tp-link:green:usb2";
  43                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  44                         default-state = "off";
  45                         trigger-sources = <&hub_port0>;
  46                         linux,default-trigger = "usbport";
  47                 };
  48
  49                 wlan2g {
  50                         label = "tp-link:blue:wlan2g";
  51                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  52                         default-state = "off";
  53                         linux,default-trigger = "phy0tpt";
  54                 };
  55
  56                 qss {
  57                         label = "tp-link:blue:qss";
  58                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  59                         default-state = "off";
  60                 };
  61         };
  62
  63          ath9k-leds {
  64                 compatible = "gpio-leds";
  65
  66                 wlan5g {
  67                         label = "tp-link:blue:wlan5g";
  68                         gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
  69                         default-state = "off";
  70                         linux,default-trigger = "phy1tpt";
  71                 };
  72         };
  73
  74         keys {
  75                 compatible = "gpio-keys";
  76
  77                 reset {
  78                         label = "Reset button";
  79                         linux,code = <KEY_RESTART>;
  80                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  81                         debounce-interval = <60>;
  82                 };
  83         };
  84
  85         gpio-export {
  86                 compatible = "gpio-export";
  87
  88                 gpio_usb1_power {
  89                         gpio-export,name = "tp-link:power:usb1";
  90                         gpio-export,output = <1>;
  91                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  92                 };
  93
  94                 gpio_usb2_power {
  95                         gpio-export,name = "tp-link:power:usb2";
  96                         gpio-export,output = <1>;
  97                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  98                 };
  99
 100         };
 101 };
 102
 103 &pcie1 {
 104         status = "okay";
 105
 106         ath9k: wifi@0,0 {
 107                 compatible = "pci168c,0033";
 108                 reg = <0x0000 0 0 0 0>;
 109                 mtd-mac-address = <&uboot 0x1fc00>;
 110                 mtd-mac-address-increment = <(-2)>;
 111                 qca,no-eeprom;
 112                 #gpio-cells = <2>;
 113                 gpio-controller;
 114         };
 115 };
 116
 117 &uart {
 118         status = "okay";
 119 };
 120
 121 &usb_phy0 {
 122         status = "okay";
 123 };
 124
 125 &usb0 {
 126         #address-cells = <1>;
 127         #size-cells = <0>;
 128         status = "okay";
 129
 130         hub_port0: port@1 {
 131                 reg = <1>;
 132                 #trigger-source-cells = <0>;
 133         };
 134 };
 135
 136 &usb_phy1 {
 137         status = "okay";
 138 };
 139
 140 &usb1 {
 141         #address-cells = <1>;
 142         #size-cells = <0>;
 143         status = "okay";
 144
 145         hub_port1: port@1 {
 146                 reg = <1>;
 147                 #trigger-source-cells = <0>;
 148         };
 149 };
 150
 151 &spi {
 152         status = "okay";
 153         num-cs = <1>;
 154
 155         flash@0 {
 156                 compatible = "jedec,spi-nor";
 157                 reg = <0>;
 158                 spi-max-frequency = <25000000>;
 159
 160                 partitions {
 161                         compatible = "fixed-partitions";
 162                         #address-cells = <1>;
 163                         #size-cells = <1>;
 164
 165                         uboot: partition@0 {
 166                                 label = "u-boot";
 167                                 reg = <0x000000 0x020000>;
 168                                 read-only;
 169                         };
 170
 171                         partition@20000 {
 172                                 label = "firmware";
 173                                 reg = <0x020000 0x7d0000>;
 174                         };
 175
 176                         art: partition@7f0000 {
 177                                 label = "art";
 178                                 reg = <0x7f0000 0x010000>;
 179                                 read-only;
 180                         };
 181                 };
 182         };
 183 };
 184
 185 &mdio0 {
 186         status = "okay";
 187
 188         phy0: ethernet-phy@0 {
 189                 reg = <0>;
 190
 191                 qca,ar8327-initvals = <
 192                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 193                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 194                         0x50 0xc737c737 /* LED_CTRL0 */
 195                         0x54 0x00000000 /* LED_CTRL1 */
 196                         0x58 0x00000000 /* LED_CTRL2 */
 197                         0x5c 0x0030c300 /* LED_CTRL3 */
 198                         0x7c 0x0000007e /* PORT0_STATUS */
 199                         0x94 0x0000007e /* PORT6 STATUS */
 200                 >;
 201         };
 202 };
 203
 204 &eth0 {
 205         status = "okay";
 206
 207         mtd-mac-address = <&uboot 0x1fc00>;
 208         mtd-mac-address-increment = <1>;
 209         phy-handle = <&phy0>;
 210         pll-data = <0x56000000 0x00000101 0x00001616>;
 211
 212         gmac-config {
 213                 device = <&gmac>;
 214                 rgmii-enabled = <1>;
 215         };
 216 };
 217
 218 &eth1 {
 219         status = "okay";
 220
 221         mtd-mac-address = <&uboot 0x1fc00>;
 222         pll-data = <0x03000101 0x00000101 0x00001616>;
 223
 224         fixed-link {
 225                 speed = <1000>;
 226                 full-duplex;
 227         };
 228 };
 229
 230 &wmac {
 231         status = "okay";
 232         mtd-cal-data = <&art 0x1000>;
 233         mtd-mac-address = <&uboot 0x1fc00>;
 234         mtd-mac-address-increment = <(-1)>;
 235 };