1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca955x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "tplink,tl-wdr4900-v2", "qca,qca9558";
10 model = "TP-Link TL-WDR4900 v2";
13 led-boot = &led_system;
14 led-failsafe = &led_system;
15 led-running = &led_system;
16 led-upgrade = &led_system;
17 label-mac-device = ð1;
21 compatible = "gpio-leds";
24 label = "blue:system";
25 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
31 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
32 trigger-sources = <&hub_port1>;
33 linux,default-trigger = "usbport";
38 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
39 trigger-sources = <&hub_port0>;
40 linux,default-trigger = "usbport";
44 label = "blue:wlan2g";
45 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
46 linux,default-trigger = "phy0tpt";
51 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
56 compatible = "gpio-leds";
59 label = "blue:wlan5g";
60 gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
61 linux,default-trigger = "phy1tpt";
66 compatible = "gpio-keys";
69 label = "Reset button";
70 linux,code = <KEY_RESTART>;
71 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
72 debounce-interval = <60>;
77 compatible = "gpio-export";
80 gpio-export,name = "tp-link:power:usb1";
81 gpio-export,output = <1>;
82 gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
86 gpio-export,name = "tp-link:power:usb2";
87 gpio-export,output = <1>;
88 gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
97 compatible = "pci168c,0033";
98 reg = <0x0000 0 0 0 0>;
99 nvmem-cells = <&macaddr_uboot_1fc00>;
100 nvmem-cell-names = "mac-address";
101 mac-address-increment = <(-2)>;
113 #address-cells = <1>;
119 #trigger-source-cells = <0>;
128 #address-cells = <1>;
134 #trigger-source-cells = <0>;
142 compatible = "jedec,spi-nor";
144 spi-max-frequency = <25000000>;
147 compatible = "fixed-partitions";
148 #address-cells = <1>;
153 reg = <0x000000 0x020000>;
158 compatible = "tplink,firmware";
160 reg = <0x020000 0x7d0000>;
163 art: partition@7f0000 {
165 reg = <0x7f0000 0x010000>;
175 phy0: ethernet-phy@0 {
178 qca,ar8327-initvals = <
179 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
180 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
181 0x50 0xc737c737 /* LED_CTRL0 */
182 0x54 0x00000000 /* LED_CTRL1 */
183 0x58 0x00000000 /* LED_CTRL2 */
184 0x5c 0x0030c300 /* LED_CTRL3 */
185 0x7c 0x0000007e /* PORT0_STATUS */
186 0x94 0x0000007e /* PORT6 STATUS */
194 nvmem-cells = <&macaddr_uboot_1fc00>;
195 nvmem-cell-names = "mac-address";
196 mac-address-increment = <1>;
197 phy-handle = <&phy0>;
198 pll-data = <0x56000000 0x00000101 0x00001616>;
209 nvmem-cells = <&macaddr_uboot_1fc00>;
210 nvmem-cell-names = "mac-address";
211 pll-data = <0x03000101 0x00000101 0x00001616>;
222 mtd-cal-data = <&art 0x1000>;
223 nvmem-cells = <&macaddr_uboot_1fc00>;
224 nvmem-cell-names = "mac-address";
225 mac-address-increment = <(-1)>;
229 compatible = "nvmem-cells";
230 #address-cells = <1>;
233 macaddr_uboot_1fc00: macaddr@1fc00 {