target/linux/ath79/dts/qca9561_avm_fritz4020.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca956x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "avm,fritz4020", "qca,qca9560";
  10         model = "AVM FRITZ!Box 4020";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_info_red;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_info_red;
  17         };
  18
  19         led_spi {
  20                 compatible = "spi-gpio";
  21                 #address-cells = <1>;
  22                 #size-cells = <0>;
  23
  24                 sck-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  25                 mosi-gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
  26                 num-chipselects = <0>;
  27
  28                 led_gpio: led_gpio@0 {
  29                         compatible = "fairchild,74hc595";
  30                         reg = <0>;
  31                         gpio-controller;
  32                         #gpio-cells = <2>;
  33                         registers-number = <1>;
  34                         spi-max-frequency = <10000000>;
  35
  36                         gpio_latch_bit {
  37                                 gpio-hog;
  38                                 gpios = <7 GPIO_ACTIVE_HIGH>;
  39                                 output-high;
  40                                 line-name = "gpio-latch-bit";
  41                         };
  42                 };
  43         };
  44
  45         leds {
  46                 compatible = "gpio-leds";
  47
  48                 led_power: power {
  49                         label = "green:power";
  50                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
  51                         default-state = "on";
  52                 };
  53
  54                 wlan {
  55                         label = "green:wlan";
  56                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
  57                         linux,default-trigger = "phy0tpt";
  58                 };
  59
  60                 lan {
  61                         label = "green:lan";
  62                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 wan {
  66                         label = "green:wan";
  67                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 info {
  71                         label = "green:info";
  72                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 led_info_red: info_red {
  76                         label = "red:info";
  77                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
  78                 };
  79         };
  80
  81         keys {
  82                 compatible = "gpio-keys";
  83
  84                 wps {
  85                         label = "WPS button";
  86                         linux,code = <KEY_WPS_BUTTON>;
  87                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  88                 };
  89
  90                 wlan {
  91                         label = "WLAN button";
  92                         linux,code = <KEY_RFKILL>;
  93                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  94                 };
  95         };
  96 };
  97
  98 &uart {
  99         status = "okay";
 100 };
 101
 102 &spi {
 103         status = "okay";
 104
 105         num-cs = <1>;
 106
 107         flash@0 {
 108                 compatible = "jedec,spi-nor";
 109                 reg = <0>;
 110                 spi-max-frequency = <25000000>;
 111
 112                 partitions {
 113                         compatible = "fixed-partitions";
 114                         #address-cells = <1>;
 115                         #size-cells = <1>;
 116
 117                         partition@0 {
 118                                 label = "urlader";
 119                                 reg = <0x000000 0x020000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@1 {
 124                                 compatible = "avm,eva-firmware";
 125                                 label = "firmware";
 126                                 reg = <0x020000 0xee0000>;
 127                         };
 128
 129                         partition@2 {
 130                                 label = "tffs (1)";
 131                                 reg = <0xf00000 0x080000>;
 132                                 read-only;
 133                         };
 134
 135                         partition@3 {
 136                                 label = "tffs (2)";
 137                                 reg = <0xf80000 0x080000>;
 138                                 read-only;
 139                         };
 140                 };
 141         };
 142 };
 143
 144 &eth0 {
 145         status = "okay";
 146
 147         phy-handle = <&swphy0>;
 148
 149         gmac-config {
 150                 device = <&gmac>;
 151
 152                 switch-phy-addr-swap = <1>;
 153                 switch-phy-swap = <1>;
 154         };
 155 };
 156
 157 &eth1 {
 158         status = "okay";
 159 };
 160
 161 &wmac {
 162         status = "okay";
 163
 164         qca,no-eeprom;
 165 };