1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca956x.dtsi"
10 compatible = "tplink,archer-c25-v1", "qca,qca9561";
11 model = "TP-Link Archer C25 v1";
14 bootargs = "console=ttyS0,115200n8";
18 compatible = "spi-gpio";
22 sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
23 mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
24 cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
25 num-chipselects = <1>;
27 /* can be removed on 4.19 */
28 gpio-sck = <&gpio 15 GPIO_ACTIVE_HIGH>;
29 gpio-mosi = <&gpio 14 GPIO_ACTIVE_HIGH>;
31 led_gpio: led_gpio@0 {
32 compatible = "fairchild,74hc595";
36 registers-number = <1>;
37 spi-max-frequency = <10000000>;
42 compatible = "gpio-keys";
45 label = "WiFi button";
46 linux,code = <KEY_RFKILL>;
47 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
51 label = "Reset button";
52 linux,code = <KEY_RESTART>;
53 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
59 led-failsafe = &power;
65 compatible = "gpio-leds";
68 label = "tp-link:green:power";
69 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
74 label = "tp-link:green:wps";
75 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
79 label = "tp-link:green:wlan2g";
80 gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
81 linux,default-trigger = "phy1tpt";
85 label = "tp-link:green:wlan5g";
86 gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
87 linux,default-trigger = "phy0tpt";
91 label = "tp-link:green:wan";
92 gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
96 label = "tp-link:amber:wan";
97 gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
101 label = "tp-link:green:lan1";
102 gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
106 label = "tp-link:green:lan2";
107 gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
111 label = "tp-link:green:lan3";
112 gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
116 label = "tp-link:green:lan4";
117 gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
127 compatible = "jedec,spi-nor";
129 spi-max-frequency = <25000000>;
132 compatible = "fixed-partitions";
133 #address-cells = <1>;
137 label = "factory-boot";
138 reg = <0x000000 0x020000>;
144 reg = <0x020000 0x010000>;
149 compatible = "denx,uimage";
151 reg = <0x030000 0x7a0000>;
154 config: partition@7d0000 {
156 reg = <0x7d0000 0x010000>;
160 info: partition@7e0000 {
162 reg = <0x7e0000 0x010000>;
166 art: partition@7f0000 {
168 reg = <0x7f0000 0x010000>;
185 phy-handle = <&swphy4>;
188 mtd-mac-address = <&info 0x8>;
193 mtd-mac-address = <&info 0x8>;
194 mtd-mac-address-increment = <1>;
199 mtd-cal-data = <&art 0x1000>;
200 mtd-mac-address = <&info 0x8>;