1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca956x.dtsi"
10 compatible = "tplink,archer-c25-v1", "qca,qca9561";
11 model = "TP-Link Archer C25 v1";
14 bootargs = "console=ttyS0,115200n8";
18 compatible = "spi-gpio";
22 sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
23 mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
24 cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
25 num-chipselects = <1>;
27 led_gpio: led_gpio@0 {
28 compatible = "fairchild,74hc595";
32 registers-number = <1>;
33 spi-max-frequency = <10000000>;
38 compatible = "gpio-keys";
41 label = "WiFi button";
42 linux,code = <KEY_RFKILL>;
43 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
47 label = "Reset button";
48 linux,code = <KEY_RESTART>;
49 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
55 led-failsafe = &power;
58 label-mac-device = ð0;
62 compatible = "gpio-leds";
65 label = "tp-link:green:power";
66 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
71 label = "tp-link:green:wps";
72 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
76 label = "tp-link:green:wlan2g";
77 gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
78 linux,default-trigger = "phy1tpt";
82 label = "tp-link:green:wlan5g";
83 gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
84 linux,default-trigger = "phy0tpt";
88 label = "tp-link:green:wan";
89 gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
93 label = "tp-link:amber:wan";
94 gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
98 label = "tp-link:green:lan1";
99 gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
103 label = "tp-link:green:lan2";
104 gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
108 label = "tp-link:green:lan3";
109 gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
113 label = "tp-link:green:lan4";
114 gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
124 compatible = "jedec,spi-nor";
126 spi-max-frequency = <25000000>;
129 compatible = "fixed-partitions";
130 #address-cells = <1>;
134 label = "factory-boot";
135 reg = <0x000000 0x020000>;
141 reg = <0x020000 0x010000>;
146 compatible = "denx,uimage";
148 reg = <0x030000 0x7a0000>;
151 config: partition@7d0000 {
153 reg = <0x7d0000 0x010000>;
157 info: partition@7e0000 {
159 reg = <0x7e0000 0x010000>;
163 art: partition@7f0000 {
165 reg = <0x7f0000 0x010000>;
182 phy-handle = <&swphy4>;
185 mtd-mac-address = <&info 0x8>;
190 mtd-mac-address = <&info 0x8>;
191 mtd-mac-address-increment = <1>;
196 mtd-cal-data = <&art 0x1000>;
197 mtd-mac-address = <&info 0x8>;