1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca956x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/leds/common.h>
10 compatible = "tplink,archer-c25-v1", "qca,qca9561";
11 model = "TP-Link Archer C25 v1";
14 led-boot = &led_power;
15 led-failsafe = &led_power;
16 led-running = &led_power;
17 led-upgrade = &led_power;
18 label-mac-device = ð0;
22 compatible = "spi-gpio";
26 sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
27 mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
28 cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
29 num-chipselects = <1>;
31 led_gpio: led_gpio@0 {
32 compatible = "fairchild,74hc595";
36 registers-number = <1>;
37 spi-max-frequency = <10000000>;
42 compatible = "gpio-keys";
45 label = "WiFi button";
46 linux,code = <KEY_RFKILL>;
47 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
51 label = "Reset button";
52 linux,code = <KEY_RESTART>;
53 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
58 compatible = "gpio-leds";
61 function = LED_FUNCTION_POWER;
62 color = <LED_COLOR_ID_GREEN>;
63 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
68 function = LED_FUNCTION_WPS;
69 color = <LED_COLOR_ID_GREEN>;
70 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
74 label = "green:wlan2g";
75 gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
76 linux,default-trigger = "phy1tpt";
80 label = "green:wlan5g";
81 gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
82 linux,default-trigger = "phy0tpt";
86 function = LED_FUNCTION_WAN;
87 color = <LED_COLOR_ID_GREEN>;
88 gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
92 function = LED_FUNCTION_WAN;
93 color = <LED_COLOR_ID_AMBER>;
94 gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
99 gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
103 label = "green:lan2";
104 gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
108 label = "green:lan3";
109 gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
113 label = "green:lan4";
114 gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
123 compatible = "jedec,spi-nor";
125 spi-max-frequency = <25000000>;
128 compatible = "fixed-partitions";
129 #address-cells = <1>;
133 label = "factory-boot";
134 reg = <0x000000 0x020000>;
140 reg = <0x020000 0x010000>;
145 compatible = "denx,uimage";
147 reg = <0x030000 0x7a0000>;
150 config: partition@7d0000 {
152 reg = <0x7d0000 0x010000>;
156 info: partition@7e0000 {
158 reg = <0x7e0000 0x010000>;
162 compatible = "fixed-layout";
163 #address-cells = <1>;
166 macaddr_info_8: macaddr@8 {
167 compatible = "mac-base";
169 #nvmem-cell-cells = <1>;
174 art: partition@7f0000 {
176 reg = <0x7f0000 0x010000>;
180 compatible = "fixed-layout";
181 #address-cells = <1>;
184 cal_art_5000: calibration@5000 {
185 reg = <0x5000 0x844>;
197 compatible = "qcom,ath10k";
198 reg = <0x0000 0 0 0 0>;
199 nvmem-cells = <&cal_art_5000>, <&macaddr_info_8 (-1)>;
200 nvmem-cell-names = "calibration", "mac-address";
207 phy-handle = <&swphy4>;
209 nvmem-cells = <&macaddr_info_8 0>;
210 nvmem-cell-names = "mac-address";
216 nvmem-cells = <&macaddr_info_8 1>;
217 nvmem-cell-names = "mac-address";
223 mtd-cal-data = <&art 0x1000>;
224 nvmem-cells = <&macaddr_info_8 0>;
225 nvmem-cell-names = "mac-address";